Instruction manual Digital 9000 System

Digital 9000 | 99
Using the SK 9000
“Cable” – Emulating different instrument cable lengths
Via the “Cable” menu item, you can emulate the lengths of instrument
cables in 3 steps. If you are using the Sennheiser CI 1-4 line/Instrument
cable, the “Cable” menu item is shown.
“RF mode” - Adjusting the transmission mode
The “RF mode” menu item allows you to adjust the transmission mode.
Settings: “HD”, “LR”.
“Display” – Selecting a standard display
The “Display” menu item allows you to select one out of 3 standard dis-
plays.
“Lock” – Activating/deactivating the lock mode
Via the “Lock” menu item, you can activate or deactivate the lock mode.
For more information on how to activate or deactivate the lock mode, refer
to page 95.
“Test tone” – Activating the 1 kHz test tone
Via the “Test tone” menu item, you can activate a 1 kHz test tone. This test
tone is transmitted instead of the input signal. You can use this function
for level matching your system or for the walk test.
“Reset” – Resetting the factory default settings
Via the “Reset” menu item, you can reset the bodypack transmitter to its
factory default settings.
“Information” – Displaying the firmware version and frequency
range
Via the “Information” menu item, you can display the firmware version
and the transmitter frequency range.
“Frequency”“Preset”“Name”
3:59
480.000
480.000MHz
3:59
U
3:59
GUITAR