Instruction manual SK 2000
Table Of Contents
- SK_2000_U1_U4_549128_1013_INT_EN
- SK2000_529677_0409_PRT_US
- Important safety instructions
- The SK 2000 bodypack transmitter
- Delivery includes
- Product overview
- Putting the bodypack transmitter into operation
- Using the bodypack transmitter
- Using the operating menu
- Synchronizing the bodypack transmitter with a receiver
- Cleaning the bodypack transmitter
- If a problem occurs ...
- Specifications
8
Putting the bodypack transmitter into operation
Putting the bodypack transmitter into
operation
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA
size batteries or the rechargeable Sennheiser BA 2015 accupack or the
DC 2 power adapter (accessories, visit www.sennheiser.com).
왘 Open the battery compartment by pushing the two catches 쐈 in the
direction of the arrows and open the cover 쐅.
왘 Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
왘 Close the battery compartment.
The battery compartment cover 쐅 locks into place with an audible
clic
k.
Charging the accupack
To charge the BA 2015 accupack (accessory, visit www.sennheiser.com)
installed in the bodypack transmitter:
왘 Insert the bodypack transmitter into the L 2015 charger (accessory,
visit www.sennheiser.com).
The L 2015 charger can only charge the combination BA 2015
accupack/bodypack transmitter. Standard batteries (primary
cells) or individual rechargeable battery cells cannot be charged.
쐅
쐈
쐅
쐂
쐂