Instruction manual SK 2000
Table Of Contents
- SK_2000_U1_U4_549128_1013_INT_EN
- SK2000_529677_0409_PRT_US
- Important safety instructions
- The SK 2000 bodypack transmitter
- Delivery includes
- Product overview
- Putting the bodypack transmitter into operation
- Using the bodypack transmitter
- Using the operating menu
- Synchronizing the bodypack transmitter with a receiver
- Cleaning the bodypack transmitter
- If a problem occurs ...
- Specifications
13
Using the bodypack transmitter
The lock mode icon 햶 flashes prior to the lock mode being activated agai
n.
Muting the audio signal or deactivating the RF signal
The MUTE switch 쐇 allows you to mute the audio signal or to deactivate
the RF signal. Via the “Mute Mode” menu item, you can set the desired
func
tion of the MUTE switch 쐇.
왘 From the “Mute Mode” menu item, select the desired setting.
왘 Exit the operating menu.
왘 Slide the MUTE switch 쐇 to the left, to the position MUTE.
The bodypack transmitter reacts as indicated in the table.
왘 Press the SET button or the ON/OFF button.
“Locked” appears on the display panel.
왘 Press the UP/DOWN button 왖/왔.
“Unlock?” appears on the display panel.
왘 Press the SET button.
The lock mode is temporarily deactivated.
– When you are in the operating menu, the lock mode
remains deactivated until you exit the operating menu.
– When one of the standard displays is shown, the lock mode
is automatically activated after 10 seconds.
Setting Slide the MUTE switch 쐇 ... Function
“AF On/Off” ... to the left (position MUTE) Mutes the audio signal
... to the right Unmutes the audio signal
“RF On/Off” ... to the left (position MUTE) Deactivates the RF signal
(offline operation)
... to the right Activates the RF signal
(online operation)
“Disabled” No function
SET
ON/OFF
SET
543.200
B.Ch: 20.64
PEAK
MUTE
EQ:
+ 12dB
-10
040
30
20
10
-20
-30
-40
AF
RF
MHz
**2000**
SKM2000
P
햶
쐇