Instruction manual SK 2000
Table Of Contents
- SK_2000_U1_U4_549128_1013_INT_EN
- SK2000_529677_0409_PRT_US
- Important safety instructions
- The SK 2000 bodypack transmitter
- Delivery includes
- Product overview
- Putting the bodypack transmitter into operation
- Using the bodypack transmitter
- Using the operating menu
- Synchronizing the bodypack transmitter with a receiver
- Cleaning the bodypack transmitter
- If a problem occurs ...
- Specifications
9
Putting the bodypack transmitter into operation
Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser micro-
phones and instruments (e.g. guitars). DC powering of the condenser
microphones is via the MIC/LINE socket 쐃 (3-pole special audio socket).
왘 Use one of the recommended Sennheiser microphones or the CI 1-4
instrument cable (see page 3).
왘 Connect the 3-pin special audio connector 씊 from the Sennheiser
microphone or instrument cable to the MIC/LINE socket 쐃.
왘 Lock the 3-pin special audio connector by screwing down the coupling
ring 씋.
왘 Via the operating menu (“Sensitivity” menu item), adjust the sensi-
tivity of the microphone/line input.
쐃
씋
씊