User Manual

Using additional functions

30 | RS 5000

Advanced settings

The advanced settings allow you to adjust the wireless headphone

system to your individual needs and to protect the settings against

accidental changes.

Activating the protected

settings mode

You can change the advanced settings by activating the protected

settings mode:

1 Disconnect the transmitter from the pow

er supply system by

unplugging the connector of the power supply unit.

2 Keep the

Hearing profile

button pressed and connect the trans-

mitter to the power supply system by connecting the connector

of the power supply unit to the yellow socket of the transmitter.

The protected settings mode is activated. The

Transmitter status

LED flashes blue. The LED segments indicate the current settings as

specified in the following chapters:

• battery status display (see page 31)

• charging reminder function (see page 31)

• hearing profile and balance protection (see page 32)

Deactivating the protected

set

tings mode and saving the

advanced settings

To save the advanced settings and to deactivate the protected set-

tings mode:

3 Disconnect the transmitter from the pow

er supply system by

unplugging the connector of the power supply unit.