Instruction manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Putting the RS 5000 into operation
- Setting up the transmitter
- Connecting the transmitter to an audio source
- Connecting the transmitter to the power supply system
- Charging the stethoset receiver’s rechargeable battery
- Displaying the remaining operating time of the rechargeable battery
- Using the charging reminder function
- Selecting and replacing the ear pads
- Using the RS 5000
- Cleaning and maintaining the RS 5000
- Using additional functions
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the RS 5000
20 | RS 5000
Switching the wireless headphone system off
왘 Take the stethoset receiver off so that the ear bows fold inwards.
The stethoset receiver automatically switches off after 20 sec-
onds. The
Receiver status
LED goes off. The transmitter auto-
matically switches off (standby) when there is no stethoset
receiver connected. The
Transmitter status
LED goes off.
왘 Always store the stethoset receiver in the transmitter’s charging
compartment to ensure that it is fully charged when needed.
The charging process starts (see page 16).
* LED goes off
To disconnect the transmitter from the power supply system (e.g.
when you are on holiday):
왘 Unplug the power supply unit from the wall socket.
If the stethoset receiver is outside the transmission range for
more than 5 minutes or if the transmitter receives no audio
signal for more than 30 minutes, the wireless headphone
system switches off automatically (standby).
OFF
+