Instruction manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Putting the RS 5000 into operation
- Setting up the transmitter
- Connecting the transmitter to an audio source
- Connecting the transmitter to the power supply system
- Charging the stethoset receiver’s rechargeable battery
- Displaying the remaining operating time of the rechargeable battery
- Using the charging reminder function
- Selecting and replacing the ear pads
- Using the RS 5000
- Cleaning and maintaining the RS 5000
- Using additional functions
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
Putting the RS 5000 into operation
12 | RS 5000
Connection possibility A: optical (digital)
To achieve the best possible listening experience, connect the trans-
mitter to your TV or hi-fi system using the supplied optical digital
cable.
Note that your wireless headphone system only supports digital
signals coded in the
PCM format. Information on how to set the
audio format of the connected audio source to PCM can be found in
the Sound menu or in the instruction manual of your device.
If an incompatible digital audio signal is being received, the
Trans-
mitter status
LED flashes white and blue. Audio cannot be repro-
duced.
* The appearance of the Sound menu can vary depending on the
device you are using.
왘 Connect the optical digital cable to the pink digital audio input
Digital Optical In of the transmitter and to the optical output of
your audio source.
A
A
S
o
und
menu
*
D
igital sound output
B
itstream
P
CM
Digital Audio
Digital Audio
1A
OPTICAL OUT