Instruction manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the earbuds
- Information on the rechargeable battery, the charging process and the first use
- Charging the rechargeable batteries using the USB cable
- Charging the rechargeable batteries wirelessly
- Connecting the earbuds to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the earbuds with a Bluetooth device
- Switching the connection to paired Bluetooth devices/“Connections”
- Disconnecting the earbuds from a Bluetooth device
- Pairing a spare earbud
- Installing the Smart Control app
- Selecting suitable ear adapters and ear fins for optimum fit of the earbuds
- Inserting the earbuds into the ears
- Switching the earbuds on
- Switching the earbuds off
- Adjusting the volume
- Information on active noise cancellation ANC
- Activating/deactivating the active noise cancellation ANC
- Adjusting the active noise cancellation ANC
- Listening to ambient sounds or conversations - activating/deactivating the Transparency Mode
- Adjusting the Transparency Mode
- Using the voice assistant/voice dialing
- Using the Smart Pause function
- Controlling music playback
- Making calls using the earbuds
- Using the Auto Call function
- Displaying the battery charge status
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Customizing the control functions
- Storing or transporting the earbuds in the charging case
- Care and maintenance of the earbuds/charging case
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer declarations
Using the earbuds
16 | MOMENTUM True Wireless 3
Charging the rechargeable batteries
using the USB cable
1. Open the charging case by overcoming a slight magnetic resis-
tance and insert the left earbud into the left charging compart-
ment and the right earbud into the right charging compartment.
The earbuds are magnetically pulled into the charging compart-
ments.
2. Connect the USB-C connector of the USB cable to the USB-C
socket of the charging case.
3. Connect the USB-A connector to a corresponding socket of a USB
power source (to be ordered separately). Make sure that the USB
power source is connected to the power supply system.
The rechargeable batteries of the earbuds and the charging case
are being charged.
If no earbuds are inserted into the charging case, only the
rechargeable battery of the charging case is being charged.
The LED of the charging case displays the charge status:
LED
Charging case WITH
earbuds inserted
Charging case
WITHOUT earbuds
inserted
pulses
yellow
... earbuds and
charging case are
being charged
... charging case is
being charged
lights up
green
... earbuds and
charging case are
fully charged
... charging case is
fully charged
flashes
red
... a charging error/
battery error has
been detected in at
least one earbud (>
38)
... a charging error/
battery error has
been detected in the
charging case (>
38)
If the LED does not light up:
• Clean the contacts on the earbuds and in the charging case
(>
37).
• Clean the USB-C socket of the charging case.
• Charge the rechargeable batteries of the earbuds and the
charging case (at least 30 minutes) until the LED lights up
again.
1 2
3
L
R
USB-C
USB-A