Deutsch MKE 1 Instruction manual English Français Italiano Español Nederlands
Contents The MKE 1 microphone ........................................... 2 Features .................................................................... 2 Delivery includes ..................................................... 2 Treble boost ............................................................. 3 Make-up protection ................................................ 3 Attachment of the microphone ........................... 4 Specifications ...........................................................
The MKE 1 microphone The MKE 1 is a high-quality, sub-miniature, sweatresistant clip-on condenser microphone. It features excellent sound quality and rugged design. The frequency response curve has been optimized for stage, studio and reporting applications (ENG). The MKE 1 is fitted with a very thin (only 1 mm) yet extremely rugged cable, making this microphone an ideal partner for all live sound applications.
Treble boost Your microphone is supplied MZC 1-1 with two different frequency response caps. These caps allow you to adjust the treble response of the microphone MZC 1-2 (see page 6). In addition, the large frequency response cap attenuates wind noise by approx. 15 dB and provides an extended protection against the ingress of moisture. 왘 Slip the cap of your choice onto the microphone until it locks into place.
Attachment of the microphone Depending on the area of application, you can attach the MKE 1 in different ways to either clothing or the body. To do so, use the optional MZ 1 accessory kit (see page 7) that offers multiple and secure attachment possibilities. The clips, holders and mounts are suitable for almost any wearing situation and ensure optimum sound quality.
Specifications MKE 1* Pick-up pattern omni-directional Frequency response 20–20,000 Hz, ± 2.5 dB Sensitivity (free field, no load) (1 kHz) 5 mV/Pa, ± 2.5 dB Nominal impedance 1,000 Ω Min. terminating impedance 4.7 KΩ Equivalent noise level A-weighted (DIN IEC 651) 27 dB Equivalent noise level CCIR-weighted (CCIR 468-1) 39 dB Max. SPL 142 dB Cable length 1.6 m Diameter of the microphone 3.3 mm Weight (w/o connector and cable) * 0.
MKE 1 Color Connector Power supply -4 -4-1 -4-2 -4-3 black white brown beige 3-pin special connector via SK 5212, SK 5012, SK 250, SK 50, SK 3063 transmitter MKE 1 -5 -5-1 -5-2 Color black white brown Connector open-ended cable Power supply 4.5–15 V -5-3 beige MKE 1 -ew -ew-1 -ew-2 -ew-3 Color black white brown beige Connector lockable 3.
Pin assignment of an MKE 1 with open-ended cable 18 kΩ core 1µF +UB AF Ground shield required connection (amplifier circuit) Accessories and spare parts Item MZC 1-1 cap, small, black MZC 1-1 cap, small, white MZC 1-1 cap, small, brown MZC 1-1 cap, small, beige MZC 1-2 cap, large, black MZC 1-2 cap, large, white MZC 1-2 cap, large, brown MZC 1-2 cap, large, beige MZC 1-3 make-up protector Lavalier tape (LAV-Tape) MZ 1 accessory kit Cat. No.
Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. In compliance with the following requirements • RoHS Directive (2002/95/EC) • WEEE Directive (2002/96/EC) Please dispose of the product at the end of its operational lifetime by taking it to your local collection point or recycling center for such equipment.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany Publ.
