Instruction manual
Important safety instructions
1. Read these safety instructions and the instruction man-
ual of the product.
2. Keep these safety instructions and the instruction man-
ual of the product. Always include all instructions when
passing the product on to third parties.
3. Only use attachments, accessories and spare parts
specified by the manufacturer.
4. Caution: The protective basket and pop shield must be
completely dry when you mount them on the micro-
phone. Moisture can cause malfunctions or damage to
the capsule
5. Connect the microphone only to microphone inputs and
supply units that provide 48V phantom powering in ac-
cordance with IEC 61938.
6. Do not attempt to open the product housing on your own.
The warranty is voided for products opened by the customer.
7. Refer all servicing to qualified service personnel. Servic-
ing is required when the product has been damaged in
any way, liquid has been spilled or objects have fallen
into the product, when the product has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
8. Use the product only under the conditions of use listed
in the specifications.
9. Let the product come to ambient temperature before
switching it on.
10. Do not operate the product if it was damaged during
transportation.
11. Always run cables so that no one can trip over them.
12. Keep the product and its connections away from liquids
and electrically conductive objects that are not neces-
sary for operating the product.
13. Do not use any solvents or aggressive cleaning agents to
clean the product.
14. Caution: Very high signal levels can damage your hearing
and your loudspeakers. Reduce the volume on the con-
nected audio devices before switching on the product;
this will also help prevent acoustic feedback.