MKE 1 Model: MKE 1-4 MKE 1-4-1 MKE 1-4-2 MKE 1-4-3 MKE 1-4-M MKE 1-5 MKE 1-5-3 MKE 1-ew MKE 1-ew-3 Instruction manual
Important safety instructions 1. Read these safety instructions and the instruction manual of the product. 2. Keep these safety instructions and the instruction manual of the product. Always include all instructions when passing the product on to third parties. 3. Only use attachments, accessories and spare parts specified by the manufacturer. 4. Caution: The protective basket and pop shield must be completely dry when you mount them on the microphone.
Intended use The MKE 1 is a high-quality, sub-miniature, sweatresistant clip-on condenser microphone. It features excellent sound quality and rugged design. The frequency response curve has been optimized for stage, studio and reporting applications (ENG). The MKE 1 is fitted with a very thin (only 1 mm) yet extremely rugged cable, making this microphone an ideal partner for all live sound applications.
Make-up protection X When putting on make-up or hair spray, protect the MKE 1 by slipping the make-up protector onto the microphone (with or without frequency response cap). X Only remove the make-up protector after makeup has been completed. Attachment of the microphone Depending on the area of application, you can attach the MKE 1 in different ways to either clothing or the body. 25 cm To do so, use the optional MZ 1 accessory kit (Art. no.
Specifications Pick-up pattern Omni-directional Frequency range 20 – 20,000 Hz, ± 2.5 dB Free-field open-circuit sensitivity (1 kHz) 5 mV/Pa, ± 2.5 dB Rated impedance 1000 Ω Min. terminating impedance 4.7 kΩ Equivalent noise level A-weighted 27 dB CCIR-weighted Sound pressure level limit 39 dB 142 dB Cable length 1.6 m Diameter of the microphone 3.3 mm Weight (w/o connector and cable) 0.
Frequency response dBV -30 -35 -40 -45 -50 -55 -60 -65 -70 100 1 *0 0 0 1 0 *0 0 0 H z MZC 1-2 MZC 1-1 Microphone Pin assignment with open-ended cable 18 kΩ core 1µ F shield +UB AF Ground required connection (amplifier circuit) Manufacturer declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on these products. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.
Warranty FOR AUSTRALIA and NEW ZEALAND ONLY: Sennheiser Australia Pty Ltd provides a warranty of 24 months on these products. For the current warranty conditions, visit Sennheiser website: Australia: https://en-au.sennheiser.com/ New Zealand: https://en-nz.sennheiser.com/ Sennheiser goods come with guarantees that cannot be excluded under Australian and New Zealand Consumer law.
separately at the end of their service life. For the packaging, follow the regulations in your country for separating waste. Improper disposal of packaging materials can be harmful to your health and the environment.
Compliance Europe UK China Vietnam Kể từ ngày 1 tháng 12 năm 2012, các sản phẩm được sản xuất bởi Sennheiser tuân thủ Thông tư 30/2011/TT-BCT quy định về giới hạn cho phép đối với một số chất độc hại trong các sản phẩm điện và điện tử.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany, Publ.