User Guide

10
Connecting an additional audio player
The 3.5 mm jack socket allows you to connect an
additional audio player (e.g. MP3 player)
.
왘 Connect the audio cable to the 3.5 mm jack socket
on the operating control and to the corresponding jack
socket on your audio player.
왘 Switch NoiseGard on (see “Switching NoiseGard on/off”
on page 15).
Audio from the additional audio source and from the
intercom are heard simultaneously through the headset.
왘 Operate the connected audio player as usual and observe
the manufacturers instructions.

DANGER! Danger of accident due to reduced
attention!
Listening to music or operating an audio
player limits your attention and may cause
accidents.
왘 During flight operation, do not use the
headset for listening to additional audio
sources!
Hearing damage due to high volumes!
This headset is capable of producing high
sound pressure levels. Higher volumes or
longer durations can damage your hearing!
왘 Set the volume to a medium level. Make
sure that you can hear critical
environmental sounds and warning
alarms!
