Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-DX EM 2 rack receiver
95
Using the headphone output
You can use the headphone output on the front of the receiver
(6.3 mm jack) to listen to the audio signals of the two channels.
CAUTION
Danger due to high volume levels
Volume levels that are too high may damage your hearing.
▷ Turn down the volume of the headphone output before you
put on the headphone.
▷ Connect the headphone to the headphone output.
▷ Press the CH 1 or CH 2 button to listen to the audio signal
from channel 1 or channel 2.
The headphone icon on the display indicates which channel
is currently active on the headphone output.
By default, the signal from channel 1 is active on the head-
phone output.
▷ You can control the volume by turning the volume knob
next to the headphone output.