Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-D EM rack receiver
50
guitar in the guitar amplif i er will be as hi gh as it woul d be
if using a guitar cable.
Possible unity gain settings:
AF Out 18 dB | Gain 27 dB
AF Out 12 dB | Gain 33 dB
AF Out 6 dB | Gain 39 dB
AF OUT menu item
Under the AF OUT menu item, you can set the level of the au-
dio signal coming from the receiver’s audio outputs (AF out
Bal/Unbal). This audio signal can be output to a mixing con-
sole or an amplifier, for example.
Open the AF OUT menu item.
The item flashes on the display as follows.
Press the UP or DOWN button to adjust the value.
Make sure that the signal in the next device in the signal
chain (e.g. mixing console, power amplifier, guitar amplifi-
er, etc.) is not overdriven.
Press the SET button to save the set value.
Recommended settings for a unity gain link:
Unity gain refers to the conf i gur ati on wher e t he audi o si g-
nal arriving at a device leaves the device with the same
level.
Example: If you are using an EW-D wireless link instead of
a guitar
cable, with unity
gain settings, the volume of the
guitar in the guitar amplif i er will be as hi gh as it woul d be
if using a guitar cable.
Possible unity gain settings:
AF Out 18 dB | Gain 27 dB
AF Out 12 dB | Gain 33 dB
AF Out 6 dB | Gain 39 dB