Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)
Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70
199
Connecting/disconnecting the charger to/
from the power supply system
You can operate the charger either with the Sennheiser NT 12-
35 CS power supply unit or with Power over Ethernet (PoE
IEEE 802.3af Class 0). Please refer to the following informa-
tion.
Power from the NT 12-35 CS power supply unit
Use only the NT 12-35 CS power supply unit from Sennheiser.
It is designed for your charger and ensures safe operation.
The power supply unit is available either separately (Senn-
heiser article number 508995) or together with the char-
ger as a kit (see „CHG 70N network-enabled charger“).
To connect the charger to the power supply system:
▷ Connect the hollow jack plug of the power supply unit to
the DC in socket on the charger.
▷ Pass the cable through the strain relief.
▷ Plug the power supply unit into the wall outlet using the
correct power cable for your country.
To completely disconnect the charger from the power supply
system:
▷ Unplug the power cable from the wall socket.
▷ Unplug the hollow jack plug of the power supply unit from
the DC in socket on the charger.