Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-DX SK | EW-DX SK 3-PIN bodypack transmitter
182
▷ Press the SET button to go to the next position.
▷ At the last position, press the SET button to save the se-
lected name.
If you enter a name for the radio link in the Name menu
item on the receiver and then synchronize the receiving
channel with the transmitter, the name entered in the
transmitter is overwritten with the name entered in the re-
ceiver.
Frequency menu item
In this menu item, you can set the trans-
mitter’s transmission frequency.
▷ Press the UP or DOWN button to set the frequency’s MHz
range.
▷ Press the SET button to confirm your selection.
▷ Press the UP or DOWN button to set the frequency’s kHz
range.
▷ Press the SET button to save the set frequency.
If you set a frequency for the channel using the Frequency
menu item on the receiver or via the Scan / Auto Setup
function and then synchronize the receiving channel with
the transmitter, the frequency entered in the transmitter is
overwritten by the frequency set in the receiver.