Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-DX SKM | EW-DX SKM-S handheld transmitter
145
The LED is flashing yellow:
▷ The link between the transmitter and receiver is estab-
lished.
▷ The audio signal is overdriven (clipping).
The LED is continuously red:
▷ No link between the transmitter and receiver.
The LED is flashing red:
▷ The link between the transmitter and receiver is estab-
lished.
▷ The battery/rechargeable battery in the transmitter is low.
The LED is off:
▷ No link between the transmitter and receiver.
▷ The transmitter is switched off.
DATA LED
The DATA LED provides information about the synchroniza-
tion of transmitters and receivers.
The LED is flashing blue:
▷ The transmitter is being synchronized with a receiver.
The LED is continuously blue:
▷ The firmware is being updated.
The LED is off:
▷ There is currently no active data link.