Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-DX EM 2 rack receiver

116

Ch 1 / Ch 2 -> Low Cut menu item

In the Low Cut menu item, you can set the value of the low cut

filter for the respective channel.

• Setting range:

• for EW-DX SK | EW-DX SK 3-PIN: Off, 30 Hz, 60 Hz, 80 Hz,

100 Hz, 120 Hz

• for EW-DX SKM | EW-DX SKM-S: 60 Hz, 80 Hz, 100 Hz,

120 Hz

To open the Low Cut menu item:

▷ In the menu, navigate to the Low Cut menu item for the de-

sired channel.

▷ Press the jog dial to open the menu.

The following view is displayed:

▷ Turn the jog dial to set the desired value.

▷ Press the jog dial to save your setting.

▷ Press the ESC button to cancel the entry without saving the

setting.

For the set value to be applied to the received transmitter,

you must synchronize the channel („Connecting to the

EW-DX EM 2 receiver / synchronizing the EW-DX EM 2“).