Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-DX EM 2 rack receiver

109

Ch 1 / Ch 2 -> Name menu item

In the Name menu item, you can define the name of the link for

the channel in question.

This name is the name of the radio link between the trans-

mitter and receiving channel. You can set the name of the

receiver as it will appear in a network from the This De-

vice menu in the system menu. See „System -> This De-

vice menu item“.

To open the Name menu item:

▷ In the menu, navigate to the Name menu item for the de-

sired channel.

▷ Press the jog dial to open the menu.

The following view is displayed:

To enter the desired link name:

▷ Turn the jog dial to select the desired character.

▷ Press the jog dial to go to the next position.

▷ At the last position, press the jog dial to save the selected

name.

▷ Press the ESC button to cancel the entry without saving the

setting.

For the chosen link name to appear on the display of the

received transmitter, you must synchronize the channel

(„Connecting to the EW-DX EM 2 receiver / synchronizing

the EW-DX EM

2“).