Instruction manual ew 500 P G4
Installing the EK 500 G4
22
Connecting headphones to the EK 500 G4
ATTENTION
Danger due to high volume levels
Volume levels that are too high may damage your hearing.
▷ Turn down the volume of the headphone output before you put on the
headphone.
To connect the headphones to the receiver:
▷ Insert the cable’s 3.5 mm jack plug into the PHONES socket on the re-
ceiver as shown in the diagram.
▷ Screw the plug’s coupling ring onto the audio socket thread of the re-
ceiver if needed.