Instruction manual ew 100 Series G3
Table Of Contents
- EW100G3_US.pdf
- LeerSeiteGross.pdf
- EW100G3_529659_0109_US_INT.pdf
- Important safety instructions
- The ew 100 G3 evolution wireless series
- Product overview
- Putting the devices into operation
- Using the devices
- Overview of the operating menus
- Cleaning the devices
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
- LeerSeiteGross.pdf
- EW100G3_Rueckseite.pdf
Using the devices
18
To completely switch the receiver off:
Disconnect the receiver from the mains by unplugging the mains unit from the wall
socket.
SK 100 bodypack transmitter
To switch the bodypack transmitter on (online operation):
Push the two catches 쐈 and open the battery compartment cover 쐅.
To switch the bodypack transmitter off:
If necessary, deactivate the lock mode (see page 21).
To switch the bodypack transmitter on and to deactivate the RF signal on switch-on (offline
operation):
Briefly press the ON/OFF button 씈.
The bodypack transmitter transmits an RF signal. The transmission icon 햵 is
displayed.
The red ON LED 쐏 lights up and the standard display “Frequency/Name” appears
on the display panel.
You can switch the bodypack transmitter on and deactivate the RF signal on switch-on.
For more information, see below.
Press the ON/OFF button 씈 until “OFF” appears on the display panel. The red
ON LED 쐏 goes off and the display panel turns off.
When in the operating menu, pressing the ON/OFF button 씈 will cancel your entry
(ESC function) and return you to the current standard display.
Press the ON/OFF button 씈 until “RF Mute On?” appears on the display panel.
Press the SET button 쐆.
The transmission frequency is displayed but the bodypack transmitter does not
transmit an RF signal. The transmission icon 햵 is not displayed.
쐅
씈
쐏
쐈
쐈
햵
ON/OFF
ON/OFF
ON/OFF
SET