00 Series Instruction manual
Contents Contents Important safety instructions ............................................................................................................................................................. 2 System ............................................................................................................................................................................................... 2 Receiver .............................................................................................
Important safety instructions Important safety instructions System • Read this instruction manual. • Keep this instruction manual. Always include this instruction manual when passing the devices and the mains unit on to third parties. • Heed all warnings and follow all instructions in this instruction manual. • Only clean the devices when they are not connected to the mains. Use a cloth for cleaning. • Only use attachments/accessories specified by Sennheiser.
Important safety instructions • Danger due to high volumes This device is capable of producing sound pressure exceeding 85 dB(A). 85 dB(A) is the sound pressure corresponding to the maximum permissible volume which is by law (in some countries) allowed to affect your hearing for the duration of a working day. It is used as a basis according to the specifications of industrial medicine. Higher volumes or longer durations can damage your hearing.
The ew 100 G3 evolution wireless series The ew 100 G3 evolution wireless series With the ew 100 G3 evolution wireless series, Sennheiser offers high-quality state-of-the-art RF transmission systems with a high level of operational reliability and ease of use. Transmitters and receivers permit wireless transmission with studio-quality sound. The frequency bank system Please note: Frequency usage is different for each country.
Product overview Product overview Overview of the EM 100 receiver 2 Data Ports auf der Rückseite ergänzen, Anzeigen-Display verkleinern, Jog-Dial entfernen, Typenschild zu 300 ändern, kein Kopfhörerausgang: Nr. anpassen 쐃 쐇 쐋 쐏 쐄 쐂 A 40 25 10 RF PEAK 0 -10 -20 -30 AF 1. 1 ew100 G3 543.
Product overview Overview of the displays of the EM 100 receiver After switch-on, the receiver displays the standard display “Receiver Parameters”. For further illustrations and examples of the different standard displays, please refer to 24. This standard display displays the operating states of the receiver. 햲 40 25 10 RF 햳 햴 PEAK 1. 1 Display 0 -10 -20 -30 AF 햵 EW100 G3 543.
Product overview Overview of the SK 100 bodypack transmitter 쐋 쐃 쐇 쐏 씉 쐂 쐄 씈 쐂 쐉 쐆 쐊 쐈 쐎 쐅 쐈 Operating elements 쐃 Microphone/instrument input (MIC/LINE), 3.
Product overview Overview of the displays of the SK 100 bodypack transmitter After switch-on, the bodypack transmitter displays the standard display “Frequency/Name”. For further illustrations and examples of the different standard displays, refer to 24. The display backlighting is automatically reduced after approx. 20 seconds. 햲 햳 햵 햴 543.
Product overview Overview of the SKM 100 radio microphone 쐄 쐆 쐂 쐏 쐋 쐇 쐊 쐈 쐅 쐎 쐊 쐉 쐅 쐅 Operating elements 쐃 Microphone head (interchangeable) 쐇 Name and pick-up pattern of the microphone head (not visible here) 쐋 Body of radio microphone 쐏 Battery compartment (not visible from outside) 쐄 Display panel, backlit in orange 쐂 Infra-red interface 쐆 Antenna 쐊 Color-coded protection ring; available in different colors 쐎 Operation and battery status indicator, red LED (lit = ON/flashing = LOW BATTERY) 쐅 Ch
Product overview Overview of the displays of the SKM 100 radio microphone After switch-on, the radio microphone displays the standard display “Frequency/Name”. For further illustrations and examples of the different standard displays, refer to 24. The display backlighting is automatically reduced after approx. 20 seconds. 햲 햳 햵 햴 543.
Putting the devices into operation Putting the devices into operation EM 100 receiver You can set up the receiver on a flat surface or mount it into a 19“ rack. For information on rack mounting, refer to the instruction manual of the EM 100 receiver available on the ew G3 product page at www.sennheiser.com. Setting up the receiver on a flat surface Place the receiver on a flat, horizontal surface. Please note that the device feet can leave stains on delicate surfaces.
Putting the devices into operation Stacking receivers CAUTION! Stack several receivers on top of each other. Danger of injury due to toppling receiver stacks! High receiver stacks can easily topple over. Place the stack on an absolutely flat surface. Secure the stack against toppling over. Fasten the stacking elements as described in the previous section. Stack the receivers so that the recesses of the stacking elements completely engage with each other.
Putting the devices into operation Connecting the mains unit Only use the supplied mains unit. It is designed for the receiver and ensures safe operation. To connect the mains unit: Insert the connector of the mains unit 씌 into the socket 쐊 of the receiver. Pass the cable of the mains unit through the cable grip 쐆. Slide the supplied country adapter 씍 onto the mains unit 씌. Plug the mains unit 씌 into a wall socket.
Putting the devices into operation Charging the accupack To charge the BA 2015 accupack: Insert the bodypack transmitter into the L 2015 charger (optional accessory). The L 2015 charger can only charge the combination BA 2015 accupack/bodypack transmitter. Standard batteries (primary cells) or individual rechargeable battery cells cannot be charged. Connecting the microphone cable/instrument cable The audio input is designed for the connection of both condenser microphones and instruments (e.g.
Putting the devices into operation To detach the belt clip: Lift one side of the belt clip as shown in the diagram on the right-hand side. Press down the belt clip at one fixing point and pull it out of the transmitter housing. Repeat for the other side. 씍 SKM 100 radio microphone Inserting the batteries/accupack For powering the radio microphone, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack.
Putting the devices into operation Charging the accupack To charge the radio microphone with the inserted BA 2015 accupack (optional accessory): Use the LA 2 charging adapter to insert the radio microphone into the L 2015 charger (both the charger and the charging adapter are available as optional accessories). Changing the microphone head The microphone head is easy to change. Unscrew the microphone head. 쐃 Do not touch the contacts of the radio microphone nor the contacts of the microphone head.
Using the devices 쐊 쐊 Using the devices To establish a transmission link, proceed as follows: 1. Switch the receiver on. 2. Switch a transmitter on. The transmission link is established and the receiver’s RF level display “RF” reacts. If you cannot establish a transmission link between transmitter and receiver: Make sure that transmitter and receiver are set to the same frequency bank and to the same channel. If necessary, read the chapter “If a problem occurs ...” on page 28.
Using the devices To completely switch the receiver off: Disconnect the receiver from the mains by unplugging the mains unit from the wall socket. SK 100 bodypack transmitter 햵 쐏 씈 쐈 쐈 쐅 To switch the bodypack transmitter on (online operation): Push the two catches 쐈 and open the battery compartment cover 쐅. ON/OFF Briefly press the ON/OFF button 씈. The bodypack transmitter transmits an RF signal. The transmission icon 햵 is displayed.
Using the devices 543.200 MHz ew100 G3 AF 햵 P MUTE Use this function to save battery power or to prepare a bodypack transmitter for use during live operation without causing interference to existing transmission links. To activate the RF signal: ON/OFF SET Briefly press the ON/OFF button 씈. “RF Mute Off” appears on the display panel. Press the SET button 쐆. The transmission icon 햵 is displayed again.
Using the devices To switch the radio microphone on and to deactivate the RF signal on switch-on (offline operation): ON/OFF Press the ON/OFF button 쐉 until “RF Mute On?” appears on the display panel. Press the multi-function switch 쐈. The transmission frequency is displayed but the radio microphone does not transmit an RF signal. The transmission icon 햵 is not displayed. 543.
Using the devices “ ” appears on the display panel of the receiver. “ ” also appears if: – no transmitter was found or the transmitter is not compatible, – no transmitter was found and the synchronization process was canceled after 30 seconds, – you canceled the transfer. Deactivating the lock mode temporarily You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item (see page 25).
Using the devices Muting the audio signal or deactivating the RF signal EM 100 To mute the audio signal: When one of the standard displays is shown on the display panel, press the STANDBY button. “RX Mute On?” appears on the display panel. SET Press the SET button. The audio signal is muted. To unmute the audio signal: Press the STANDBY button. “RX Mute Off?” appears on the display panel. SET Press the SET button. The muting is canceled. SK 100 쐇 햵 543.
Using the devices The current state of the muting function or the RF signal is displayed on the display panel of the bodypack transmitter.
Using the devices Selecting a standard display EM 100 Press the UP/DOWN button to select a standard display: Contents of the display 40 25 10 RF PEAK 0 -10 -20 -30 AF 40 25 10 RF 40 25 10 RF 1. 1 ew100 G3 543.200 MHz P MUTE PEAK 0 -10 -20 -30 AF Soundcheck 543.200 MHz Selectable standard display “Receiver Parameters” appears after switch-on of the receiver and displays the receiver parameters (see page 5).
Overview of the operating menus Overview of the operating menus For more detailed information on the operating menus, refer to the individual instruction manuals of the devices. These instruction manuals can be downloaded from the respective product pages at www.sennheiser.com.
Overview of the operating menus Display Function of the menu item Easy Setup Scans for unused frequency presets, releases and selects frequency presets Frequency Preset Changes the frequency bank and the channel Name Enters a freely selectable name AF Out Adjusts the audio output level Adjustment range: -24 dB to +24 dB, adjustable in 3-dB steps, 6 dB gain reserve Special function “gain reserve”: When you have adjusted a level of +18 dB, press the UP button 쐄 until the next higher value appears.
Cleaning the devices Display Function of the menu item Main menu Sensitivity Adjusts the sensitivity “AF” Frequency Preset* Changes the frequency bank and the channel Name* Enters a freely selectable name Auto Lock Activates/deactivates the automatic lock mode Advanced Calls up the extended menu “Advanced Menu” Exit Exits the operating menu and returns to the current standard display Extended menu “Advanced Menu” Tune Sets the transmission frequencies for the frequency bank “U” Special funct
Cleaning the devices To clean the radio microphone’s sound inlet basket (MMD 835-1, MMD 845-1, MMD 935-1, MMD 945-1, MME 865-1): Unscrew the upper sound inlet basket from the microphone head by turning it counterclockwise. CAUTION! Liquids can damage the microphone head! Liquids can damage the microphone head. Only clean the upper sound inlet basket. Remove the foam insert.
Cleaning the devices Problem RF signal available, no audio signal, “MUTE” appears on the display panel Possible cause Transmitter is muted (“MUTE”) or transmitter doesn’t transmit a pilot tone Possible solution Cancels the muting (see page 22). Switch the pilot tone transmission on the transmitter on (see page 27). Switch the pilot tone evaluation on the receiver off (see page 26). Receiver’s squelch threshold is adjusted Reduce the squelch threshold too high (see page 25). Reposition the antennas.
Cleaning the devices Problem Possible cause No RF signal at the receiver Bodypack transmitter/radio microphone Synchronize the bodypack transmitter/radio and receiver are not on the same channel microphone with the receiver (see page 20). Possible solution Set the bodypack transmitter/radio microphone to the same channel as the receiver. Bodypack transmitter/radio microphone is out of range Check the squelch threshold setting on the receiver.
Specifications Specifications EM 100 RF characteristics Modulation Receiving frequency ranges Switching bandwidth Nominal/peak deviation Receiver principle Sensitivity (with HDX, peak deviation) wideband FM 516–558, 566–608, 626–668, 734–776, 780–822, 823–865 MHz (A to E, G, see page 4) 1,680 frequencies, tuneable in steps of 25 kHz 20 frequency banks, each with up to 12 factory-preset channels, intermodulation-free 1 frequency bank with up to 12 user programmable channels 42 MHz ±24 kHz / ±48 kHz true d
Specifications In compliance with (EM) Europe: EMC Radio Safety USA: 47 CFR 15 subpart B EN 301489-1/-9 EN 300422-1/-2 EN 60065 Approved by Canada: Industry Canada RSS 210, IC: 2099A-G3EM100 Mains unit* NT 2–1 NT 2–3 Input voltage 110 V~ or 230 V~, 50/60 Hz 9 VA 13 V 300 mA –10 °C to +40 °C 100 to 240 V~, 50/60 Hz max.
Specifications AF characteristics Compander system AF frequency response SK SKM S/N ratio (1 mV, peak deviation) THD Max. input voltage (SK) microphone/line Input impedance (SK) microphone/line Input capacitance (SK) Adjustment range of input sensitivity Sennheiser HDX microphone: 80–18,000 Hz line: 25–18,000 Hz 80–18,000 Hz ≥ 110 dBA ≤0.
Specifications Microphones (SK 100) ME 2 ME 3 ME 4 Microphone type condenser condenser condenser Sensitivity 20 mV/Pa 1.6 mV/Pa 40 mV/Pa Pick-up pattern omni-directional cardioid cardioid Max. SPL 130 dB SPL 150 dB SPL 120 dB SPL Microphone heads (SKM 100) MMD 835-1 MMD 845-1 MME 865-1 Radio microphone type dynamic dynamic condenser Sensitivity 2.1 mV/Pa 1.6 mV/Pa 1.6 mV/Pa Pick-up pattern cardioid super-cardioid super-cardioid Max.
Manufacturer Declarations Polar diagram MME 865-1 30° 0° 0 Frequency response curve MME 865-1 dBV 30° -30 5 10 60° 60° 15 -40 20 25 90° -50 90° dB -60 120° 120° -70 125 Hz 250 Hz 150° 150° 180° 2000 Hz 4000 Hz 500 Hz 8000 Hz 1000 Hz 16000 Hz -80 50 100 200 0° 500 1k 2k 5k 10k 20k Hz 90° Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.
Manufacturer Declarations Statements regarding FCC and Industry Canada These devices comply with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) these devices may not cause harmful interference, and (2) these devices must accept any interference received, including interference that may cause undesired operation.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany Publ.
