Instruction manual ew 100 Series G3
Table Of Contents
- EW100G3_US.pdf
- LeerSeiteGross.pdf
- EW100G3_529659_0109_US_INT.pdf
- Important safety instructions
- The ew 100 G3 evolution wireless series
- Product overview
- Putting the devices into operation
- Using the devices
- Overview of the operating menus
- Cleaning the devices
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
- LeerSeiteGross.pdf
- EW100G3_Rueckseite.pdf
Putting the devices into operation
14
Charging the accupack
To charge the BA 2015 accupack:
Insert the bodypack transmitter into the L 2015 charger (optional accessory).
Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser microphones and instru-
ments (e.g. guitars). DC powering of the condenser microphones is via the audio input.
Use one of the recommended Sennheiser microphones or the optional CI 1 instrument
cable.
Connect the 3.5 mm jack plug 씊 from the Sennheiser microphone or instrument cable to
the 3.5 mm jack socket MIC/LINE 쐃.
Lock the 3.5 mm jack plug by screwing down the coupling ring 씋 of the cable.
Via the operating menu, adjust the sensitivity of the microphone/line input.
Attaching and positioning the corresponding microphones
ME 2/ME 4 Use the microphone clip 씌 to attach the microphone to clothing (e.g. tie, lapel).
The ME 2 clip-on microphone (shown on the right in the diagram) has an omni-directional
pick-up pattern. It is therefore not necessary to position it precisely.
Attach the ME 2 microphone as close as possible to the sound source.
The ME 4 clip-on microphone (shown on the left in the diagram) has a cardioid pick-up
pattern.
Position the ME 4 microphone so that its sound inlet is directed towards the sound source
(e.g. mouth).
ME 3 Adjust the ME 3 headmic so that a comfortable and secure fit is ensured.
The ME 3 headmic has a cardioid pick-up pattern.
Position the microphone so that its sound inlet is directed towards the sound source
(e.g. mouth).
Attaching the bodypack transmitter to clothing
You can use the belt clip 씍 to attach the bodypack transmitter to clothing (e.g. belt, waist-
band).
The belt clip is detachable so that you can also attach the transmitter with the antenna
pointing downwards. To do so, withdraw the belt clip 씍 from its fixing points and attach it
the other way round. The belt clip 씍 is secured so that it cannot slide out of its fixing points
accidentally.
The L 2015 charger can only charge the combination BA 2015 accupack/bodypack
transmitter. Standard batteries (primary cells) or individual rechargeable battery
cells cannot be charged.
쐃
씋
씊
씌