Users Manual

Synchronizing devices
184
Hold the infra-red interface of the transmitter in front of the infra-red
interface of the receiver.
The parameters are transferred to the transmitter. The blue LED blinks
during transmission.
When the transfer is complete, a tick appears in the receiver’s display
as a confirmation. Then the receiver will return to the current standard
display.
To cancel synchronization:
Press the ESC button on the receiver.
An X appears in the display.
This icon also appears when:
no transmitter is found or the transmitter is not compatible.
no transmitter is found and the synchronization process automatically
ends after 30 seconds.