Media Control Protocol for ew G4 series

TI 1254 v1.0 - ew G4 | 32/37
Technical information
Media control protocol description
Commands valid for SR only
Sensitivity [set and get]
Valid for device SR only
Description
On a SR device the sensitvitiy can be adjusted by using this command. It is also possible to read the
current sensitivity value.
Parameters
Name Value range Get request Set request Relative
change
Sensitivity value -42..0: Sensitivity value in dB with a
step size of 3 dB
- X Yes
Examples
Sensitivity -21<CR>
Sensitivity is set to -21 dB. Sennheiser device replies with Sensitivity -21<CR>.
Sensitivity #3<CR>
Sensitivity is incremented by 3 times the step size in reference to its current value e.g. previous
value -21 dB => new value -12 dB. Sennheiser device replies with Sensitivity -12<CR>.
Sensitivity -20<CR>
1020: Value out of range [ Sensitivity -20 ]<CR>.
Sensitivity<CR>
Current status is sent, e.g. Sensitivity -21<CR>.