Media Control Protocol for ew G4 series

TI 1254 v1.0 - ew G4 | 29/37
Technical information
Media control protocol description
RF [get only by cyclic attributes]
Valid for device EM only
This attribute is sent to media control together with other cyclic attributes. The first parameter
shows the current RF level in % (100% => 40 dBµV). Values greater than 100% are possible. The
second parameter indicates the current antenna state.
The third parameter represents the current pilot state. If the pilot tone is deactivated, the pilot flag
will be processed.
Parameters
Name Value range Get request Set request Relative
change
Current RF level 0.. greater 100% possible - - No
Current antenna
state
1: antenna 1 is active
2: antenna 2 is active
- - No
Current pilot state 0: no pilot signal detected
1: pilot signal detected
- - No
Examples
See chapter „Response of cyclic attributes“ on page 9.