Media Control Protocol for ew G4 series

TI 1254 v1.0 - ew G4 | 23/37

Technical information

Media control protocol description

Commands valid for EM only

Squelch [set and get]

Valid for device EM only

Description

This command sets the squelch of an EM device. It also can be used to read the squelch status. In

order to deactivate squelch function the parameter has to be set to 0 (see examples). Switching off

squelch function can not be achieved by using relative parameters.

Parameters

Name Value range Get request Set request Relative

change

Squelch value (0) 5..25: Squelch value in dB

in 2 dB step size

- X Yes

Examples

Squelch 0<CR>

Squelch is switched off. Sennheiser device replies with Squelch 0<CR>.

Squelch 7<CR>

Squelch is set to 7 dB. Sennheiser device replies with Squelch 7<CR>.

Squelch #1<CR>

Squelch is incremented by one step size e.g. previous value 7 dB => new value 9 dB. Sennheiser

device replies with Squelch 9<CR>.

Squelch #-2<CR>

Squelch is decremented by 2 step sizes e.g. previous value 9 dB => new value 5 dB. Sennheiser