Media Control Protocol for ew G4 series

TI 1254 v1.0 - ew G4 | 17/37
Technical information
Media control protocol description
RfConfig [get only]
Valid for device EM and SR
Description
This command provides the media control with information about frequency range and the step
size. The order of the values which are sent back correspond to frequency minimum, frequency
maximum and frequency step size. All values are in kHz. It may happen that a device has got some
frequency gaps within its range. In such a case the parameters are sent out more than once.
Parameters
Name Value range Get request Set request Relative
change
Frequency mini-
mum
depends on frequency range unit is
in kHz
- - No
Frequency maxi-
mum
depends on frequency range unit is
in kHz
- - No
Frequency step
size
25 or 125 unit is in kHz - - No
Examples
RfConfig<CR>
A possible return could be ‚RfConfig 566000 608000 25<CR>‘, which means frequency minimum is
at 566.000 MHz, frequency maximum is at 608.000 MHz and frequency step size is 25 kHz. Another
possible return could be ‚RfConfig 779125 787875 125 797125 805875 125 806125 809750 125<CR>‘.
This means that first block goes from 779.125 MHz to 787.875 MHz with a frequency step size of
125 kHz, the second block starts from 797.125 and ends up at 805.875 MHz with a frequency step
size of 125 kHz and the third block starts from 806.125 and terminates at 809.750 MHz also with
frequency step size of 125 kHz.