Media Control Protocol for ew G4 series

TI 1254 v1.0 - ew G4 | 14/37
Technical information
Media control protocol description
BankList [get only]
Valid for device EM and SR
Description
By using this command with its parameter a list of frequencies in kHz is sent to media control. The
order of the sent frequencies are conform to the channels which means that first frequency f1 cor-
respond to channel 1, second frequency f2 correspond to channel 2 and so on.
Bank number 21 until 26 correspond to user bank 1 to user bank 6.
It may happen that less channels of a user bank are used as possible. For example there are 32
channels in a user bank but only channels 2 and 4 are used. The command BankList returns in such
a case only 4 frequencies, for instance „BankList 0 822000 0 819375<CR>“ . The remaining chan-
nels from 5 to 32 are left out because all of them would be 0‘s anyway.
Parameters
Name Value range Get request Set request Relative
change
Number of banks 1..20: Presets
21..26: User banks
X - No
Examples
BankList 10<CR>
List of frequencies of bank 10 is sent to media control.
BankList 21<CR>
List of frequencies of user bank 1 is sent to media control.