Instruction manual ew IEM G4

Using the AC 41
106
Switching the AC 41 on and off
To switch on the antenna combiner:
▷ Briefly press the ON/OFF button.
The antenna combiner switches on and the power LED turns green.
The transmitters receive the RF signal. The status LEDs light up (see
“Meaning of the LEDs”).
To switch the antenna combiner to standby mode:
▷ Hold down the ON/OFF button until the power LED turns off.
To fully switch off the antenna combiner:
▷ Disconnect the antenna combiner from the power supply system by un-
plugging the power supply unit from the wall socket.