Instruction Manual
Table Of Contents
- Important safety instructions
- The EK 300 IEM G3 diversity receiver
- Delivery includes
- Product overview
- Putting the diversity receiver into operation
- Using the diversity receiver
- Using the operating menu
- Adjusting settings via the operating menu
- Synchronizing an SR 300 IEM G3 transmitter with the diversity receiver
- Cleaning the diversity receiver
- Recommendations and tips
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
25
Specifications
Specifications
RF characteristics
AF characteristics
Overall device
Modulation wideband FM
Frequency ranges 516–558, 566–608, 606–648, 626–668,
734–776, 780–822, 823–865 MHz
(A to E, G, GB, see page 3)
Receiving frequencies 1,680 frequencies,
tuneable in steps of 25 kHz
20 frequency banks, each with up
to 16 factory-preset channels
6 frequency banks, each with up
to 16 user programmable channels
Switching bandwidth 42 MHz
Nominal/peak deviation ±24 kHz/±48 kHz
Receiver principle adaptive diversity
Sensitivity
(with HDX, peak deviation)
< 4 μV, ty
p. 1.6 μV for 52 dBA
rms S/N
Adjacent channel rejection typ. ≥ 65 dB
Intermodulation attenuation typ. ≥ 70 dB
Blocking ≥ 80 dB
Squelch Off, 5 to 25 dBμV,
adjustable in steps of 2 dB
Pilot tone squelch evaluation can be switched off
Compander system Sennheiser HDX
S/N ratio
(1
mV, peak deviation)
approx. 90 dB
THD ≤ 0.9%
Output power at 2.4 V,
5 % THD, nominal deviation
2 x 100 mW at 32 Ω
High Boost +8 dB at 80 kHz
Limiter –18 dB to –6 dB,
adjustable in steps of 6 dB,
can be switched off
Temperature range –10°C to +55°C
Power supply
2
AA size batteries, 1.5 V
or BA 2015 accupack
Nominal voltage 2.4 V
Power consumption:
• at nominal voltage
• with switched-off receiver
approx. 140 mA
≤ 25 μA
Operating time approx. 4 to 6 hrs
(depending on volume level)
Dimensions approx. 82 x 64 x 24 mm
Weight (incl. batteries) approx. 125 g