Instruction Manual
Table Of Contents
- Important safety instructions
- The EK 300 IEM G3 diversity receiver
- Delivery includes
- Product overview
- Putting the diversity receiver into operation
- Using the diversity receiver
- Using the operating menu
- Adjusting settings via the operating menu
- Synchronizing an SR 300 IEM G3 transmitter with the diversity receiver
- Cleaning the diversity receiver
- Recommendations and tips
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
13
Using the operating menu
Changing and storing settings
Canceling an entry
To subsequently return to the last edited menu item:
Exiting a menu item
To directly return to the current standard display:
Press the SET button to call up the menu item.
Press the UP/DOWN button / to set the frequency bank.
Press the SET button to confirm your selection.
Press the UP/DOWN button / to set the channel.
Press the SET button to store the setting.
Press the ESC button to cancel the entry.
The current standard display appears on the display panel.
Press the SET button repeatedly until the last edited menu
item appears.
Change to the “Exit” menu item.
Confirm your selection.
Y
ou return to the next higher menu level or you exit the oper-
ating menu and return to the current standard display.
Press the ESC button.
Menu
B.Ch: 1. 1
Frequency Preset
B.Ch:
863.100MHz
Frequency Preset
1. 1
B.Ch:
Frequency Preset
Call up “Frequency
Preset”
Select the
frequency bank
and confirm
Select the channel;
store the setting
“Stored”
SET
SET
SET
6. 3
824.500MHz
SET
SET
SET
ESC
SET
Menu
Exit
SET
ESC