Instruction Manual

12
Using the operating menu
Working with the operating menu
By way of example of the “Frequency Preset” menu, this section describes
how to use the operating menu.
Changing from a standard display to the operating menu
Selecting a menu item
“Easy Setup“
14
Reset List Releases all locked frequency presets 14
Current List Selects an unused frequency preset 14
Scan New List Scans for unused receiving frequencies
(frequency preset scan)
14
Exit Exits “Easy Setup” and returns to the main
menu
–
Extended menu “Advanced Menu”
17
Tune Sets the receiving frequencies for the
frequency banks “U1” to “U6”
17
Sets the channel and the receiving frequency
for the frequency banks “U1” to “U6”
18
Pilot Tone Activates/deactivates the pilot tone evaluation 18
Limiter Adjusts the limiter 18
Volume Boost Adjusts the volume boost 19
LCD Contrast Adjusts the contrast of the display panel 19
Engineer Mode Adjusts the menu item and loading profiles 19
Reset Resets the settings made in the operating
menu
20
Software Revision Displays the current software revision 20
Exit Exits the extended menu “Advanced Menu”
and returns to the main menu
–
If the lock mode is activated, you have to deactivate it in order to
be able to work with the operating menu (see page 10).
 Press the SET button.
The current standard display is replaced by the main menu.
The last called up menu item is displayed.
 Press the UP/DOWN button / to change to the “Frequency
Preset” menu item.
The current setting of the selected menu item is displayed:
Display Function of the menu item Page
SET
Menu
Frequency Preset
B.Ch: 1. 1