Instruction manual

Adjusting settings via the operating menu

Selecting a channel and assigning this channel a frequency



Set the desired frequency (MHz and kHz section) as described in the

previous chapter.

 Press the SET button to confirm the MHz section of the

frequency.

The kHz section of the frequency is highlighted.

 Press the UP/DOWN button / to set the kHz section of the

frequency.

 Press the SET button to confirm the frequency.

“Stored” appears on the display panel. The “Tune” menu item

appears again.

 Press the UP/DOWN button / until the “Tune” menu item

appears.

 Press the SET button and keep it pressed until the frequency

bank is highlighted.

 Press the UP/DOWN button / to set the frequency bank.

 Press the SET button to confirm the frequency bank.

The channel is highlighted.

 Press the UP/DOWN button / to set the channel.

 Press the SET button to confirm the channel.

The frequency (MHz section) is highlighted.

SET

Tune

B.Ch: U1. 1

B.Ch: U5. 1

Tune

Advanced

Tune

“Stored”

823.925 MHz

SET SET

SET

Select the frequency

bank and confirm

Select the channel;

store the setting

Call up “Tune”

(special function)

SET