Instruction manual

9
Putting the diversity receiver into operation
Putting the diversity receiver into
operation
Inserting the batteries/accupack
For powering the diversity receiver, you can either use two 1.5 V AA size
batteries or the rechargeable Sennheiser BA 2015 accupack or the DC 2
power adapter (see “Accessories” on page 35).
 Open the battery compartment by pushing the two catches 쐈 in the
direction of the arrows and open the cover 쐅.
 Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
 Close the battery compartment by pressing on the center of the
cover 쐅.
The battery compartment cover 쐅 locks into place with an audible
click.
Charging the accupack
To charge the BA 2015 accupack (see “Accessories” on page 35) installed
in the diversity receiver:
 Insert the diversity receiver into the L 2015 charger (see “Accessories”
on page 35).
The L 2015 charger can only charge the combination BA 2015
accupack/diversity receiver. Standard batteries (primary cells) or
individual rechargeable battery cells cannot be charged.
쐅
쐈
쐅
쐂
쐂