User Manual - D 10 Series
Table Of Contents
- Important safety information
- Scope of delivery
- Product overview
- Setting up and connecting the base station
- Individually adjusting the headset
- Configuring the headset system
- Making calls using the headset
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs
- Specifications
Cleaning and maintaining the headset system
35 | D 10 series
Replacing the headset’s rechargeable battery
1 Remove the ear hook or the headband (see page 14) and open the
battery compartment.
2 Carefully move the battery compartment cover in the direction of the
a
rrow until you overcome a slight resistance. Remove the rechargeable
battery and carefully loosen the connector plug of it.
3 Insert the connector plug of the new recharg
eable battery into the
connection socket. Observe correct orientation of the connector plug.
4 Close the battery compartment.
WARNING
Injuries or damage to the product!
In extreme cases, abuse or misuse of rechargeable batteries or
non-original Sennheiser batteries can lead to explosion, fire
development, heat generation or smoke/gas development.
왘
Only use original Sennheiser spare rechargeable batteries. Spare
rechargeable batteries are available from your Sennheiser partner.
CAUTION
Damage to the product due to improper handling
The cables can be kinked or damaged if you open the battery compartment
too jerkily.
왘 Carefully open the battery compartment and loosen th
e connector plug
of the rechargeable battery.
1
2 3
4