Instruction manual - Digital 6000 (v4.0)
Table Of Contents
- The Digital 6000 Series
- Products in the Digital 6000 series
- Accessories
- Installing Digital 6000 series devices
- Installing the EM 6000
- Connectors on the rear of the device
- Connecting/disconnecting the EM 6000 to/from the power supply system
- Connecting the EM 6000 to a network
- Outputting analog audio signals
- Outputting digital audio signals
- Outputting audio via a Dante™ network (EM 6000 DANTE only)
- Connecting the word clock
- Connecting remote antennas
- Connecting rod antennas
- Installing the EM 6000 in a rack
- Installing the SKM 6000
- Installing the SK 6000
- Installing the SK 6212
- Installing the L 6000 | LM 6060 | LM 6061 | LM 6062
- Using Digital 6000 series devices
- Using the EM 6000
- Operating elements on the front of the device
- Switching the EM 6000 on and off
- Displays on the EM 6000 display panel
- Buttons for navigating through the menu
- Home screen
- Muting the audio signal
- Setting options in the menu
- Menu structure
- Frequency menu item
- Name menu item
- Sync Settings menu item
- Encryption menu item
- Command Mode menu item
- Scan & Auto-Setup menu item
- Walktest menu item
- AF Output menu item
- Test Tone menu item
- Bank Edit menu item
- System menu item
- System -> Transmission Mode menu item
- System -> Wordclock menu item
- System -> Network menu item
- System -> Device ID menu item
- System -> Dante Settings (only EM 6000 DANTE) menu item
- System -> Booster Feed menu item
- System -> Brightness menu item
- System -> Auto Setup menu item
- System -> Info menu item
- System -> Hardware menu item
- System -> Help menu item
- System -> TX Update menu item
- System -> Reset menu item
- Using the headphone output
- Updating the firmware of the receiver
- Updating the firmware of the Dante™ interface
- Status messages
- Using the SKM 6000
- Using the SK 6000
- Using the SK 6212
- Using the L 6000
- Switching the L 6000 on and off
- Charging rechargeable batteries
- Meaning of the LEDs on the L 6000 charger and LM 6060, LM 6061 and LM 6062 charging modules
- Preparing rechargeable batteries for storage (storage mode)
- Resetting settings (factory reset)
- Updating the firmware
- Operating the L 6000 via a network
- Establishing a radio link
- Synchronizing devices
- Overview
- Recommendations for using antennas
- Equidistant frequency grid
- Link Density mode
- Word clock scenarios for digital audio (AES3 and Dante™)
- Overview
- Product variants
- Specifications
- Cleaning and maintenance
The Digital 6000 Series
1
PRODUCT INFORMATION
The Digital 6000 Series
For more information about the individual products in the Digital 6000 se-
ries, see „Products in the Digital 6000 series“.
For information about the available accessories, see „Accessories“.
►
When perfection is required there can be no compromises. The Digital
6000 system combines experience, high standards and excellent instincts
for day-to-day work in the modern live event industry into one simple
promise: no compromises in RF robustness, sound or workflow.
The 2-channel system delivers quality, reliability and efficiency in a com-
pact 19-inch/1 RU format. The series incorporates the renowned Long
Range mode with the proprietary audio codec (SeDAC) of the wireless
masterpiece, Digital 9000.
True bit diversity evaluates the quality of each individual bit and combines
the bits from the two parallel reception streams. In combination with a
switching bandwidth of 244 MHz and equidistant frequency grid, it pro-
vides the greatest possible transmission reliability even in demanding RF
environments. Digital 6000 is compatible with many other Sennheiser an-
tennas and capsules and has an easy-to-follow user interface on clear
OLED displays, digital and analog outputs and AES 256 encryption. The
Dante Version with an Audinate Brooklyn II Card offers an additional RJ-45
connector.
The series is ideal for touring and rental companies, theater and musical
productions, broadcasting, large places of worship and corporate applica-
tions.