DW-Series_0610_SP10.book Seite 1 Freitag, 16.
DW-Series_0610_SP10.book Seite 1 Freitag, 16.
DW-Series_0610_SP10.book Seite 1 Freitag, 16. April 2010 10:22 10 Important safety information Important safety information • Please read this instruction manual carefully and completely before using the product. • Make the instruction manual easily accessible to all users at all times. Always include the instruction manual when passing the product on to third parties. • Do not use the product in situations which require special attention (e.g. when performing skilled jobs).
DW-Series_0610_SP10.book Seite 2 Freitag, 16. April 2010 10:22 10 Important safety information • Unplug the power supply unit from the wall socket – to completely disconnect the product from the mains power supply – during lightning storms or – when unused for long periods of time. • Only operate the power supply unit from the type of power source specified in the chapter “Specifications” of the detailed instruction manual (included on the enclosed CD ROM).
DW-Series_0610_SP10.book Seite 3 Freitag, 16. April 2010 10:22 10 Important safety information Safety instructions for Lithium-Polymer rechargeable batteries If abused or misused, the rechargeable batteries may leak. In extreme cases, they may even present • • • • a heat hazard, a fire hazard, an explosion hazard, a smoke or gas hazard. Please understand that Sennheiser Communications does not accept liability for damage arising from abuse or misuse. Keep away from children. Do not short-circuit.
DW-Series_0610_SP10.book Seite 4 Freitag, 16. April 2010 10:22 10 Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser Communications A/S gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.senncom.com or contact your Sennheiser partner.
DW-Series_0610_SP10.book Seite 5 Freitag, 16. April 2010 10:22 10 Manufacturer Declarations Statements regarding FCC and Industry Canada This equipment complies with Part 15 of the FCC Rules and with RSS-213 of Industry Canada. Operation is subject to the following two conditions: (1) this equipment may not cause harmful interference, and (2) this equipment must accept any interference received, including interference that may cause undesired operation.