BTD300Audio_532802_0909.book Seite 1 Freitag, 21.
BTD300Audio_532802_0909.book Seite 2 Freitag, 21.
BTD300Audio_532802_0909.book Seite 1 Freitag, 21.
BTD300Audio_532802_0909.book Seite 2 Freitag, 21.
BTD300Audio_532802_0909.book Seite 1 Freitag, 21. August 2009 9:34 09 Important safety information • • • Please read this instruction manual carefully and completely before using the product. Make this instruction manual easily accessible to all users at all times. Always include this instruction manual when passing the product on to third parties. Always keep the product dry and do not expose it to extreme temperatures.
BTD300Audio_532802_0909.book Seite 2 Freitag, 21. August 2009 9:34 09 • Keep this product at least 20 cm from pacemakers. Radio waves can impair the operation of pacemakers. Intended use Intended use of this product includes: • having read this instruction manual, especially the chapter “Important safety information”, • using the product within the operating conditions and limitations described in this instruction manual.
BTD300Audio_532802_0909.book Seite 3 Freitag, 21. August 2009 9:34 09 Lithium-Polymer rechargeable batteries The BTD 300 Audio has a built-in Lithium-Polymer rechargeable battery. If abused or misused, this rechargeable battery may leak. WARNING! In extreme cases, the rechargeable battery may even present • a heat hazard, • a fire hazard, • an explosion hazard, • a smoke or gas hazard. Please understand that Sennheiser does not accept liability for damage arising from abuse or misuse.
BTD300Audio_532802_0909.book Seite 4 Freitag, 21. August 2009 9:34 09 Keep away from children. Do not heat above 70°C/158°F or throw into a fire. Do not expose to moisture. Do not mutilate or dismantle. Switch rechargeable battery-powered devices off after use. When not using rechargeable batters for extended periods of time, charge them regularly (about every three months). Only charge rechargeable batteries at ambient temperatures between 10°C/50°F and 40°C/104°F.
BTD300Audio_532802_0909.book Seite 5 Freitag, 21. August 2009 9:34 09 BTD 300 Audio If your audio source, PC or mobile phone does not support the Bluetooth stereo audio profile (A2DP), you can use the BTD 300 Audio adapter. The BTD 300 Audio allows you to extend the functionality of your devices by adding support for this Bluetooth profile. Bluetooth wireless technology provides an interface for wireless communication between your audio source, PC or mobile phone and other Bluetooth enabled devices, e.g.
BTD300Audio_532802_0909.book Seite 6 Freitag, 21.
BTD300Audio_532802_0909.book Seite 7 Freitag, 21. August 2009 9:34 09 왘 Charge the rechargeable battery when the LED flashes red. When the rechargeable battery is fully charged, the LED goes off. For charging the rechargeable battery, use the mains unit supplied with your PX headphones or PX headset. The mains unit is also available from your specialist dealer (Cat. No. 525776).
BTD300Audio_532802_0909.book Seite 8 Freitag, 21. August 2009 9:34 09 Pairing the BTD 300 Audio (I) 왘 Make sure that your product is in pairing mode (see the instruction manual of your headphones or loudspeaker system). 7s Memory function The BTD 300 Audio can save the connection profiles of up to 5 Bluetooth devices with which it has been paired. After switch-on, it automatically connects to one of these devices.
BTD300Audio_532802_0909.book Seite 9 Freitag, 21. August 2009 9:34 09 If you pair the BTD 300 Audio with a sixth audio source, the saved connection profile of the first Bluetooth device will be overwritten. Pairing the BTD 300 Audio (II) If the BTD 300 Audio does not detect a Bluetooth device, it switches off after 5 minutes.
BTD300Audio_532802_0909.book Seite 10 Freitag, 21.
BTD300Audio_532802_0909.book Seite 11 Freitag, 21. August 2009 9:34 09 Technical data Input voltage Input current Rechargeable battery Charging time Operating time Nominal impedance Audio connection Cable length Weight 5V max. 140 mA 3.7 V; 340 mAh; Lithium-Polymer ~ 3 hrs 14 hrs 540 Ω 3.5 mm stereo jack socket 10 cm 20 g PSC 03R-050 mains unit Nominal input voltage Nominal input current Nominal output voltage Nominal output current 110–240 V~ max. 0.2 A 5V max. 0.
BTD300Audio_532802_0909.book Seite 12 Freitag, 21. August 2009 9:34 09 Bluetooth Bluetooth® Range Transmission frequency Protocol Codecs version 2.0 + EDR up to 10 m 2.4 GHz A2DP SBC, apt-X® Accessories Cat. No.
BTD300Audio_532802_0909.book Seite 13 Freitag, 21. August 2009 9:34 09 Manufacturer Declarations Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner.
BTD300Audio_532802_0909.book Seite 14 Freitag, 21. August 2009 9:34 09 In compliance with: USA FCC ID: DMOBTD300A Canada IC: 2099A-BTD300A Europe 0560 Bluetooth QD ID B15373 The Bluetooth® word mark and the Bluetooth® logo are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronics GmbH & Co. KG is under license. apt-X® is a registered trademark of Audio Processing Technology Ltd.
BTD300Audio_532802_0909.book Seite 15 Freitag, 21. August 2009 9:34 09 Statements regarding FCC and Industry Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
BTD300Audio_532802_0909.book Seite 16 Freitag, 21. August 2009 9:34 09 which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
BTD300Audio_532802_0909.book Seite 17 Freitag, 21. August 2009 9:34 09 FCC Declaration of Conformity (DoC) SENNHEISER Model No: BTD 300 Audio We, Sennheiser Electronic Corporation Strat. Marketing • Stefanie Reichert One Enterprise Drive • Old Lyme • CT 06371 • USA Tel: +1 (860) 434 9190, ext. 144 Fax: +1 (860) 434 1759 declare the above device comply with the requirements of Federal Communications Commission. This device complies with Part 15 of the FCC rules.
BTD300Audio_532802_0909.book Seite 1 Freitag, 21. August 2009 9:34 09 Sennheiser electronic GmbH & Co. KG, Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in China Publ.