Titel.fm Seite 1 Montag, 2.
For your safety Contents For your safety ............................................................................................... 1 The ADN D1/C1 and ADN-W D1/C1 conference units ............................ 1 Package contents .......................................................................................... 2 Components required for operation .......................................................... 3 Product overview ADN D1/C1 ..............................................................
Package contents Package contents ADN standard system components 1 ADN D1 delegate unit or ADN C1 chairperson unit 1 instruction manual The ADN D1 and ADN C1 wired conference units are ready for operation upon delivery. You have to connect the conference units to the ADN CU1 central unit by means of system cables (detailed information can be found in the ADN system manual).
Components required for operation Components required for operation Wired and wireless components can be combined arbitrarily. Central unit Number Description Cat. No. Function 1 ADN CU1-EU central unit, EU version 505553 Controls the conference (wired and wireless 505554 components) and supplies power to a max.
Components required for operation Wireless components Antenna module Number 1-4 Wireless conference units Number Description max. 150 ADN-W D1 wireless delegate unit 1 - 10 ADN-W C1 wireless (optional) chairperson unit depend- ADN-W BA battery pack ing on the number of ADN-W MIC 15-39 wireless ADN-W MIC 36-29 conferADN-W MIC 15-50 ence units ADN-W MIC 36-50 Description Cat. No. ADN-W AM antenna module 504743 ADN-W AM-US antenna 505715 module, US version Cat. No.
Product overview ADN D1/C1 Product overview ADN D1/C1 1 1 2 2 ADN C1 ADN D1 : A B 9 9 8 8 7 6 5 3 4 7 6 1 Sound inlet basket with glued windshield 2 Signal light ring 7 Microphone key 8 Microphone LED 3 Headphone socket 4 Priority key 9 Loudspeaker < IN socket 5 Next key 6 Headphone volume control for headphone socket A OUT socket B Type plate (see bottom) 3 ADN C1/ADN D1 | ADN-W C1/ADN-W D1 | 5
Product overview ADN-W D1/C1 Product overview ADN-W D1/C1 1 1 2 1 2 2 C ADN-W ADN-W ADN-W ADN-W -29 -50 MIC 36 MIC 36 -50 MIC 15 -39 MIC 15 1 2 < A 9 ADN-W C1 < A D B < A D < A 9 8 E B ADN-W D1 8 7 6 5 3 7 6 3 4 1 Sound inlet basket with glued windshield ADN-W MIC 15: glued windshield ADN-W MIC 36: plug-on windshield 2 Signal light ring 3 Headphone socket 4 Priority key 5 Next key 6 Headphone volume control for headphone socket 7 Microphone key 6 | ADN C1/ADN D1 | ADN
Preparing the ADN-W D1/C1 wireless conference units for operation Preparing the ADN-W D1/C1 wireless conference units for operation To operate the wireless conference unit, you have to connect a gooseneck microphone (ADN-W MIC 15 or ADN-W MIC 36; available in different lengths) to the console of the conference unit. The ADN-W BA battery pack supplies power to the wireless conference unit.
Preparing the ADN-W D1/C1 wireless conference units for operation If you screw the microphone to or unscrew it from the wireless conference unit during operation (wireless conference unit is switched on), proper functioning of the conference unit cannot be guaranteed, i.e. volume differences or noise may occur. 왘 First connect the microphone and then switch the conference unit on.
Preparing the ADN-W D1/C1 wireless conference units for operation 2 ADN-W BA Status LED Color Meaning RF status indictor 2 – good transmission quality blue, flashing slowly transmission quality is temporarily reduced blue, flashing rapidly transmission quality is permanently reduced 2 If no connection to an antenna module can be established within 5 minutes, the wireless conference unit automatically switches off.
Operating a delegate unit Operating a delegate unit The operation of the ADN D1 wired conference unit and the ADN-W D1 wireless conference unit is identical. Taking the floor/Making a request to speak If the conference mode is set to “Direct Access” or “Override” (detailed information can be found in the ADN system manual): 왘 Press the microphone key 7 . Your microphone switches on and you can take the floor immediately. The microphone LED 8 and the signal light ring 2 light up red.
Operating a delegate unit Deactivating the microphone/Canceling a request to speak To deactivate the microphone when you have finished speaking or to cancel a request to speak (“Direct Access”, “Override” or “Request” mode): 왘 Press the microphone key 7 once more. The microphone LED 8 and the signal light ring 2 go off. If the conference mode is set to “Push to talk”: 왘 Release the pressed microphone key 7 . The microphone LED 8 and the signal light ring 2 go off.
Operating a chairperson unit Operating a chairperson unit The operation of the ADN C1 wired conference unit and the ADN-W C1 wireless conference unit is identical. Beside the chairperson functions, chairperson units offer the same functions as delegate units. A chairperson unit allows you to take the floor at any time without having to “apply” for a comment. If your conference system comprises several chairperson units, all chairperson units have equal rights.
Cleaning and maintaining the conference units 왘 Briefly press the priority key 4 . The conference system behaves as set. If you are using the “Conference Manager” software, you can also deactivate all delegate units with a mouse (detailed information can be found in the ADN system manual). 4 Muting all delegate units temporarily (priority function) 2 Using the priority function, the chairperson can interrupt a discussion at any time.
Specifications Specifications ADN D1 and ADN C1 conference units Console Supply voltage 35 V to 52.8 V Power consumption 2 W (without reproduction via loudspeakers) Headphone socket 3.5 mm stereo jack socket Output level at headphone socket 50 mW/16 Ω THD (at 1 kHz) 0.03 % at 50 mW/16 Ω Frequency response 100 Hz to 14.
Specifications Output level at headphone socket 50 mW/16 Ω THD (at 1 kHz) 0.03% at 50 mW/16 Ω Frequency response Signal-to-noise ratio 100 Hz to 14.5 kHz > 70 dB(A) Temperature range operation: +5°C to +45°C storage: -25°C to +70°C Relative humidity operation: 20 to 80% storage: 10 to 90% Dimensions (W x H x D) 185 x 67 x 180 mm; without gooseneck Weight approx.
Specifications CE Declaration of Conformity RoHS Directive (2011/65/EU) Radio Equipment Directive (2014/53/EU) EMC Directive (2014/30/EU) The declaration is available at www.sennheiser.com/download Before putting the product into operation, please observe the respective country-specific regulations. Italy: For private use, a general authorization for the frequency band 5150 - 5725 MHz is required if our wireless system is used outside own premises. For public use, a general authorization is required.
Specifications Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Rückseite.fm Seite 2 Montag, 2. September 2013 3:57 15 Sennheiser electronic GmbH & Co. KG KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany, Publ.
