4407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Instructions for Genesis Wireless Security System™ Power & Alarm Solution with Data Analytics Capability Code 120-010 Rev 5 Prepared 10/2016 COPYRIGHT © 2016 Sennco Solutions, Inc. All rights reserved.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Notifications This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Warning! The Main Alarm and Sensor Heads contain Lithium Ion (Li-ion) battery packs. Do not charge pack unattended. Do not reverse-charge or reverse-connect. Do not short circuit. Do not expose battery to direct sunlight. Do not dispose of in fire. Do not insert batteries with different connector.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Table of Contents I. II. Parts List (What does it come with?) A. Main Alarm……………………………………………………………………...……..……. Page 5 B. Security Perimeter Dome………………………….………………………………….. Page 5 C. Sensor head…………………………………………………………………….……………. Page 5 D. Cloud Interface..……………………………………………………………..……………. Page 5 E. Cradle………………………………………………………………………..………………….
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST I. Parts List A. Main alarm Main alarm unit AC power cable for Main Alarm DaKey *Actual cable may differ from image. B. Security Perimeter Dome Security Perimeter Dome AC power cable for Security Perimeter Dome *Actual cable may differ from image. C.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST E. Cradle Cradle Cradle mounting plate Cradle mounting plate adhesive Cradle mounting plate hardware AC power cable *Actual cable may vary. Cordwinder Cordwinder adhesive *Cordwinder model may vary. *Cordwinder adhesive may vary. Optional parts: Wedge Wedge adhesive 0.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST II. Description of Alarm A. Main alarm + Data Monitor Rated 24V 2.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST B. Security Perimeter Dome Rated 24V 2.71A max Antenna (internal) DIP switches Antenna Arrow (all Security Perimeter Domes must face the same direction) C. Sensor head Rated 5V 2A max Caution: DO NOT connect devices that draw more than 2A.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST D.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST E.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST III. Set Up Note: Main Alarm, Cloud Interface, and cradles should be located at the same height as much as possible. A. Cradles Cradle mounting option 1: Mounting plate using adhesive (no wedge) 1. Clean the flat side of the cradle mounting plate using an alcohol wipe. Dry with a clean cloth. 2.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Cradle mounting option 2: Mounting plate using screws (no wedge) 1. Center the cradle mounting plate over the position, flat side down. The slot in the center post of the cradle mounting plate should be open at the top and the large opening in the cradle mounting plate should be at the top left.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Cradle mounting option 4: Wedge using screws 1. Center the wedge over the position. The lower side should be to the front. 2. Insert two appropriate length screws from the mounting kit. (Depending on your fixture type you may need to drill holes for the mounting screws.) 3. Place a washer and nut on each screw underneath the fixture. 4.
407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Cradle mounting continued (following mounting option 1, 2, 3, or 4) 1. Find the Cordwinder. Clean the top of the Cordwinder box where the cable exits using an alcohol wipe. Dry it with a clean cloth. 2. Peel the backing off of the Cordwinder mounting adhesive and secure the adhesive to the Cordwinder.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST 13. There is a red LED on the bottom of the cradle which will be lit when the cradle is receiving power. This LED is not visible when the cradle is on the cradle mounting plate. 14. Repeat as necessary for additional cradles. B. Cloud Interface 1.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST D. Security Perimeter Domes 1. Plug the barrel plug end of the power cable into the power port on the Security Perimeter Dome. 2. Plug the power cable into an outlet that has AC power available. 3. The green LED on the front of the Security Perimeter Dome indicates power is being received. 4. Place the Security Perimeter Dome in position.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST E. Sensor heads 1. Clean the surface of the sensor head’s inside face using an alcohol wipe. Dry with a clean cloth. 2. Peel the backing off of the shielding and carefully line it up with the edge of the sensor head’s inside face. The v notch will be at the top of the sensor head and the charging port will be at the bottom. 3.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST 13. Center the sensor head on the back of the device to be protected. 14. Press firmly for about 15 seconds for a strong adhesive bond. 15. Plug the charging cable into the device’s charging port. F. Connecting sensor heads to Cordwinder cables 1. Pull a length of the Cordwinder cable from the cradle and bring the sensor head to it. 2.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST IV. Teaching DaKeys DaKeys will be programmed or “taught” to the system simply by inserting them into the DaKey port on the Main Alarm. The first DaKey inserted will be taught automatically. Additional DaKeys can be taught by inserting them within five seconds after removing a previously taught DaKey.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST V. Resetting the system A.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST VI. Sensor head alarm A. If the sensor head is out of the “safe zone” sphere created by the Security Perimeter Domes then the red LEDs on the sensor head will begin to flash. B. After 1-2 seconds the sensor head will emit an alarm tone that is audible to the person holding the device. C.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST VIII. Disarming the Main Alarm A. Insert DaKey in Main Alarm. B. Press and hold button 3 seconds to reset the system. LCD will state “Release to reset.” C. Wait for all sensors to be found. Repeat step B if not all sensors are found. D. LCD will state, “Remove key to arm system.” The system will remain disarmed until the key has been removed. E.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST X. Points of Sensing A. Micro USB power cable If the Micro USB power cable (charging cable) is unplugged from the protected device or from the sensor head or if it is cut, then both the Main Alarm and the specific sensor head will immediately siren. B.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Questions? Please contact Sennco Solutions technical support at: Toll free phone: 866-736-6261 Cellular phone: 815-557-4786 Email: techsupport@sennco.com COPYRIGHT © 2016 Sennco Solutions, Inc. All rights reserved.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST This page intentionally left blank.