4407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Notifications Patents: Patent No.: US 8,279,077 B1 Patent No.: US 8,558,714 B1 Sennco Solutions, Inc. is not held liable for any firmware or software changes implemented by the displayed product’s manufacturer, distributor, or reseller. Any changes/modifications to this equipment not approved by Sennco Solutions Inc.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Table of Contents I. II. Parts List (What does it come with?) A. Main alarm……………………………………………………………………………..……. Page 4 B. Bubble maker……………………………………………………………………………….. Page 4 C. Sensor head…………………………………………………………………….……………. Page 4 D. Sniffer……………………………………………………………………………..……………. Page 4 E. Cradle………………………………………………………………………..…………………. Page 5 F.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST I. Parts List A. Main alarm Main alarm unit AC power cable for main alarm DaKey B. Bubble maker Bubble maker AC power cable for bubbler maker C. Sensor head Sensor head Sensor head shielding Sensor head adhesive Key WPWR cable D.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST E. Cradle Cradle Cradle mounting plate Cordwinder 7 Adhesive for Cordwinder 7 Bolts with T nuts AC power cable F.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST II. Description of Alarm A.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST B. Bubble maker Antenna (internal) DIP switches Antenna Arrow (all bubble makers must face the same direction) C.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST D. Sniffer Antenna USBA cable Antenna AC power port E.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST F.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST III. Set Up A. Cradles 1. Insert bolts through holes in cradle mounting plate. Thread a T nut onto each bolt. 2. Place cradle mounting plate into position on the fixture. The T nuts should be turned to allow them to fit through the track. Make sure that the large opening in the cradle mounting plate is at the top left. 3.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST 10. Pull the cable end up through the large hole in the cradle mounting plate. 11. Guide the cable into the slot on the center post of the cable mounting plate. Slowly allow the cable to retract until the cable end rests on the center post. 12.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST B. Main alarm 1. Plug the barrel plug end of the AC power cable into the AC power port on the main alarm. 2. Plug the other end of the cable into an outlet that has AC power available. 3. Place the main alarm in a secure location within 50 feet of the bubble makers with the antenna positioned vertically 90°.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST E. Bubble makers 1. Plug the barrel plug end of the AC power cable into the AC power port on the bubble maker. 2. Plug the other end of the cable into an outlet that has AC power available. 3. The green LED on the front of the bubble maker indicates power is being received. 4. Place the bubble maker in position.
407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST F. Sensor heads 1. Clean the surface of the sensor head’s inside face using an alcohol wipe. Dry with a clean cloth. 2. Peel the backing off of the shielding and carefully line it up with the edge of the sensor head’s inside face. The v notch will be at the top of the sensor head and the charging port will be at the bottom. 3.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST 13. Center the sensor head on the back of the device to be protected. 14. Press firmly for about 15 seconds for a strong adhesive bond. 15. Plug the micro USB power cable into the device’s charging port. G. Connecting sensor heads to cordwinder cables 1. Pull a length of the cordwinder cable from the cradle and bring the sensor head to it. 2.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST IV. Teaching DaKeys DaKeys will be programmed or “taught” to the system simply by inserting them into the DaKey port on the main alarm. The first DaKey inserted will be taught automatically. Additional DaKeys can be taught by inserting them within five seconds after removing a previously taught DaKey.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST V. Configuring the system A.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST VI. Sensor head alarm A. If the sensor head is out of the “safe zone” sphere created by the bubble makers then the red LEDs on the sensor head will begin to flash. B. After 1-2 seconds the sensor head will emit an alarm tone that is audible to the person holding the device. C.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST VIII. Points of Sensing A. Micro USB power cable If the Micro USB power cable is unplugged from the protected device, or from the sensor head, or if it is cut then the main alarm will immediately be triggered. B. Sensor head plunger If the sensor head is removed from the back of the protected device then the main alarm will immediately be triggered. C.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST Questions? Please contact Sennco Solutions technical support at: Toll free phone: 866-736-6261 Email: techsupport@sennco.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544 www.sennco.com | techsupport@sennco.com 815.577.3400 | Toll free 866.736.6261 Mon - Fri 9AM - 5PM CST This page intentionally left blank.