User's Manual

ManualsBrandsSengled ManualsElectronicsSengled Zigbee Module

Table Of Contents

Canada Regulations:

ZM005 User Manual

1. Introduction

ZM005 is a cost-effective embedded ZIGBEE Low Energy module launched by

sengled, CustomNodes QPG6095ZDTR13 technology, which are fully integrated

System-on-Chips that integrate a 2.4 GHz, IEEE 802.15.4-2003-compliant

transceiver, 32-bit ARM @ Cortex @ - M4 core, maximum working frequency of

64 MHzThe highest 512 kB flash and 64 kB of RAM12 channel peripherals

reflection system, may realize the MCU peripheral autonomic interaction

Integrated PA, TX power up to 10 dBm (2.4 GHz) powerful peripherals, QFN40

6x6 mm package.

2. Module samples

Summary of content (6 pages)

PAGE 1
ZM005 User Manual 1. Introduction ZM005 is a cost-effective embedded ZIGBEE Low Energy module launched by sengled, CustomNodes QPG6095ZDTR13 technology, which are fully integrated System-on-Chips that integrate a 2.4 GHz, IEEE 802.15.4-2003-compliant transceiver, 32-bit ARM @ Cortex @ - M4 core, maximum working frequency of 64 MHzThe highest 512 kB flash and 64 kB of RAM12 channel peripherals reflection system, may realize the MCU peripheral autonomic interaction Integrated PA, TX power up to 10 dBm (2.
PAGE 2
3. General information 1. At 2.4 GHz (250 KBPS O-QPSK DSSS), the Rx current is 3 mA 2. A combination of 64 MHz ARM Cortex-M4 and a high-performance 2.4 GHz radio is designed for IoT connectivity Provide industry-leading energy-saving wireless SoC 3.Built-in 64kBytes SRAM, 512KBytes Flash 4.Single power supply 1.8 to 3.6V 5. supported with 10dBm maximum TX power 6.10 golden-finger pins are easy installation with PCB-Through-PCB 7.Compact size 24*17 8.PCB antenna 9.
PAGE 3
5.The module is limited to OEM installation ONLY. 6.The OEM integrator is responsible for ensuring that the end-user has no manual instructions to remove or install module. 7. The host end product must include a user manual that clearly defines operating requirements and conditions that must be observed to ensure compliance with current FCC RF exposure guidelines.
PAGE 4
user manual must also contain clear instructions on how end users can find and/or access the module and the FCC ID. The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device.
PAGE 5
Canada Regulations: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 6
"Contient IC: 20888-ZM005" ou "où: 20888-ZM005 est le numéro de certification du module". A label with the following statements must be attached to the host end product: This device contains IC: 20888-ZM005.