User Manual Z01-A19NAE26- Wireless LED Bulb Z02-Hub –Sengled Hub LED + Smart Control
EN System Features: Control Element lighting from anywhere at anytime Schedule scenes based on timing, brightness and color temperature View live and historic energy consumption statistics Control Sengled Element bulbs via local Wi-Fi network or Sengled cloud • Track and report number of power cycles and usage hours • • • • Element Bulb Features • Wireless control • Dimmable via Element app, wall switches and most wall dimmers • Adjustable color temperature from warm white (2700K) to cool white (6500K) • 2
EN Local Operations *To ensure the following steps work successfully, please power on the bulb first and wait for at least four seconds before taking any of the steps. Reset the hub: The hub has to be reset when changing Wi-Fi networks. Press and hold the white round button on the side of the hub for at minimum eight seconds and then release it, the middle blue signal indicator light on the front of the hub should flash eight times if the reset is successful.
EN System Setup Instructions • Please review the Quick Start guide for instructions on how to set up the Element Hub • Please contact customer service via Sengled.com for information on how to purchase additional bulbs. To add additional bulbs, please follow the in-app instructions to scan, power on and add the bulbs to their desired hub as shown below • NOTE: Bulbs associated with another Sengled account must first be deleted and factory reset.
EN Important Safety Instructions • This product is intended for indoor use only • Do not install the product near any heat sources, such as heaters, radiators, stoves, heat registers or other apparatus that produce heat • To reduce the risk of electric shock, do NOT disassemble.
FCC STATEMENT FOR USERS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SECTION 15.
IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with “Industry Canada RSS-102 for radiation exposure limits set forth for an uncontrolled environment”.