User Manual Manuel de l’utilisateur Guía delusuario E11-G13- element classic Z02-Hub –Sengled Hub LED + Smart Control
EN System Features: Control Element lighting from anywhere at anytime Schedule scenes based on timing, brightness and View current power and historic energy consumption. Control Sengled Element bulbs via local Wi-Fi network or Sengled cloud • Track and report number of power cycles and usage hours • • • • Element Bulb Features • Wireless control • Dimmable via Element app • Support for warm white 2700K color temperature 25,000 hour LED lifetime • Wide beam angle • Supports Zigbee HA 1.2.
EN Local Operations *To ensure the following steps work successfully, please power on the bulb first and wait for at least four seconds before taking any of the steps. Reset the hub: The hub has to be reset when changing Wi-Fi networks. Press and hold the white round button on the side of the hub for at minimum eight seconds and then release it, the middle blue signal indicator light on the front of the hub should flash eight times if the reset is successful.
EN • NOTE: Bulbs associated with another Sengled account must first be deleted and factory reset. Refer to the Local Operations section of the User Manual for instructions on how to factory reset a bulb. • NOTE: Bulbs accidentally deleted from a Sengled account must first be factory reset before being re-added.
EN • For best protection against lightning,unplug or unscrewtheproducts from its power source duringa storm • The bulb will be hot when in use and should not be touched without taking care • Do NOT throw the LED bulb into regular trash at the end of its life.
EN FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
EN list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne.
Rev 1.1 2016.04 © 2016 Sengled, Incorporated. All rights reserved. www.sengled.