User Manual Mesh BLE 5.0 Module ---------------------------------------------------------------------------- Module No.: BT002 Version: V1.0 Change History: Version Description V1.
Content 1 Introduction .................................................................................................... 3 2 Features ......................................................................................................... 3 3 Applications ..................................................................................................... 4 4 Module Diagram .............................................................................................. 4 5 Pins Description ...............
1 Introduction BT002 intelligent lighting module is a Bluetooth 5.0 low power module based on TLSR8253F512AT32 chip. The Bluetooth module with BLE and Bluetooth mesh networking function, Peer to peer satellite network communication, using Bluetooth broadcast for communication, can ensure timely response in case of multiple devices. It is mainly used in intelligent light control. It can meet the requirements of low power consumption, low delay and short distance wireless data communication.
Stamp hole patch package, easy to machine paste PCB antenna 3 Applications LED Lighting control Smart Devices Switch, Remote Control Smart Home Module Pins Assignments
4 Electronic Specification Item Min TYP Max Unit 9.76 9.9 9.76 dBm -92 -94 -96 dBm +/-10 +/-15 KHz RF Specifications RF Transmitting Power Level RF Receiver Sensitivity @FER<30.8%, 1Mbps RF TX Frequency tolerance RF TX Frequency range 2402 2480 MHz RF Channel CH0 CH39 / RF Channel Space MHz 2 AC /DC Characteristics Operation Voltage 3.0 3.3 3.6 V 10 ms Supply voltage rise time (3.3V ) Input High Voltage 0.7VDD VDD V Input Low Voltage VSS 0.
5 Power Consumption Operation Mode Consumption TX current 4.8mA Whole chip with 0dBm RX current 5.3mA Whole chip Standby (Deep Sleep) depend on firmware 0.4uA (optional by firmware) 6 Antenna Specification ITEM UNIT MIN Frequency MHz 2400 TYP 2500 V.S.W.R Gain(AVG) MAX 2.0 dBi 1.
OEM/Integrators Installation Manual 1. List of applicable FCC rules This module has been tested and found to comply with part 15.247 requirements for Modular Approval. 2. Summarize the specific operational use conditions This module can be used in IoT devices. The input voltage to the module should be nominally 3.3VDC and the ambient temperature of the module should not exceed 85℃. BT002 has one PCB antenna with max antenna gain 1.0dBi.
9. Additional testing, Part 15 Subpart B disclaimer The final host / module combination need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device.