User Manual Mesh BLE 5.0 Module ---------------------------------------------------------------------------- Module No.: BT001 Version: V1.0 Change History: Version Description V1.
Content 1 Introduction ......................................................................................................3 2 Features ............................................................................................................3 3 Applications .......................................................................................................4 4 Module Diagram ................................................................................................4 5 Pins Description ..........
1 Introduction BT001 intelligent lighting module is a Bluetooth 5.0 low power module basedonTLSR825Xchip.TheBluetoothmodulewithBLEandBluetoothmesh networking function, Peer to peer satellite network communication, using Bluetoothbroadcastforcommunication,canensuretimelyresponseincaseof multipledevices. Itismainlyusedinintelligentlightcontrol.
3 Applications LEDLightingcontrol SmartDevicesSwitch,RemoteControl SmartHome 4 Module Diagram TLS825xSoCdiagram
ModulePinsAssignments 5 Pins Description Pin NAME I/O Description TLSR 1 PWM3 I/O PWMoutput TLSR825xPIN31 2 PD4 I/O GPIO TLSR825xPIN1 3 A0 I/O GPIO TLSR825xPIN3 4 A1 I/O GPIO TLSR825xPIN4 5 PWM4 I/O PWMoutput TLSR825xPIN14
PWM5 I/O PWMoutput TLSR825xPIN15 7 ADC I A/Dinput TLSR825xPIN16 8 VDD P Powersupply， TLSR825x 3.3V/5.
@FER<30.8%,1Mbps RFTXFrequency +/-10 tolerance +/-15 KHz RFTXFrequency range 2402 2480 MHz RFChannel CH0 CH39 / RFChannelSpace 2 MHz AC /DC Characteristics OperationVoltage 3.0 3.3 3.6 V 10 ms Supplyvoltagerise time （from1.6Vto 2.8V） InputHighVoltage 0.7VDD VDD V InputLowVoltage VSS 0.3VDD V OutputHighVoltage 0.9VDD VDD V OutputLowVoltage VSS 0.1VDD V 7 Power Consumption Operation Mode Consumption TXcurrent 4.
Antenna Specification ITEM UNIT MIN Frequency MHz 2400 TYP 2500 V.S.W.R Gain(AVG) MAX 2.0 dBi 1.0 Maximuminput power W Antennatype PCB antenna RadiatedPattern Omni-direc tional Impendence 50Ω 1 FCC Certification Requirements. According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a mobile device. And the following conditions must be met: 1.
5. This module must not transmit simultaneously with any other antenna or transmitter 6. The host end product must include a user manual that clearly defines operating requirements and conditions that must be observed to ensure compliance with current FCC RF exposure guidelines. For portable devices, in addition to the conditions 3 through 6 described above, a separate approval is required to satisfy the SAR requirements of FCC Part 2.
The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
