Specifications

ManualsBrandsSengled ManualsElectronicsSengled Smart LED

Introduction:

Sengled Smart Bluetooth LED bulbs offer an easy solution to

having voice-controllable and app-controllable smart lighting in

your home. These bulbs enable you to control your lights in

multiple ways—on/off, dimming, routines, Away mode, etc. —

through the Alexa app on your phones or simply voice

commands.

Note: The Alexa devices that supports BLE Mesh connection

includes:

Echo 2nd Gen, Echo 3rd Gen, Echo Dot 2nd Gen, Echo

Dot 3rd Gen, Echo Dot 3rd Gen with clock, Echo Plus 1st Gen,

cho Plus 2nd Gen, Echo Show 1st Gen, Echo Show 5, Echo Show

8, Echo Show 10, Echo Spot, Echo Input, Echo Flex, Echo Studio.

To get the full compatible device list, please visit

www.sengled.com/support

Important Safety Information:

Before installing the Sengled Smart LED bulbs, please read

and follow all precautions, including:

• Turn o power before installation or removal. Discontinue

use if damaged.

• Warning: risk of electric shock. Do not attempt to

disassemble bulb.

• Not suitable for use with wall dimmers.

• Suitable for use in operating environment between

-4°F and 104°F (-20°C and 40°C).

• Not for use in emergency lighting.

• Indoor use only.

Wireless Specification：

Wireless Frequency Range: 2402~2480MHz

Operating channels: CH0~CH39 Maximum

Transmitted Output Power: 10.16dBm

Wor

ks with Amazon Echo Devices

Product Type:Sengled Smart LED

Model:B1F-N5E

Power Supply:AC 120V

Sengled Smart Bluetooth Mesh LED Bulb

smart lighting expert

Summary of content (5 pages)

PAGE 1
smart lighting expert Sengled Smart Bluetooth Mesh LED Bulb Works with Amazon Echo Devices Product Type:Sengled Smart LED Model:B1F-N5E Power Supply:AC 120V Introduction: Sengled Smart Bluetooth LED bulbs offer an easy solution to having voice-controllable and app-controllable smart lighting in your home. These bulbs enable you to control your lights in multiple ways—on/off, dimming, routines, Away mode, etc. — through the Alexa app on your phones or simply voice commands.
PAGE 2
Installation Instructions: The following instructions are applicable to adding your Smart LED bulb to an Alexa Device that supports BLE Mesh bulb. Note: Please ensure your Amazon Alexa device is setup before adding the Smart bulb. It needs to have the latest software upgrade. You can try “Alexa, is my software up to date?” to trigger software update, then add the smart bulb. • Sengled Smart Bluetooth Mesh LED bulbs are created for Frustration Free Setup.
PAGE 3
Reset Instructions: To reset your Smart LED bulb, ensure that the bulb is on and then quickly turn the bulb off and on at least 5 times (using a light switch or power bar works best). If the reset is successful, the bulb will flash three times. If it does not flash three times, you will have to try again. Once successfully reset, please try to pair it in your Alexa app again. Operation: The following section outlines some of the popular operational modes of the Sengled Smart Bluetooth Mesh LED bulbs.
PAGE 4
Frequently Asked Questions: 1. Can I use Sengled Home app to set up and control my Bluetooth bulb? Not now, at this point, Sengled Smart Bluetooth bulb only works with Alexa app. 2. Can I connect Sengled smart Bluetooth Mesh LEDs bulb directly to my smart phone using Bluetooth connect and then use Alexa app to control it? No. The Smart LED bulb must be connected with a compatible Alexa device, instead of a smart phone. Limited Warranty: 3-year limited warranty from original purchase date.
PAGE 5
FCC Statement： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.