SD13 User Manual Manuel de l’utilisateur Manual del usuario DESKTOP MONITOR MOUNT SUPPORT DE MONITEUR DE BUREAU MONTAJE PARA MONITOR DE ESCRITORIO 17.6 lb 75x75 to 100x100 ±90° ±180° 8 kg www.senecaav.com VESA compliant 8.7” (22 cm) 0.8"~3.
Introduction Thank you for choosing a Seneca AV desktop monitor mount. The SD13 is designed to mount three flat panel monitors weighing up to 17.6 lbs (8 kg) each, allowing you to adjust height, swivel left and right 180°, and tilt your screen ±90°. Read these instructions fully before assembly and installation of this mount. Visit our website at senecaav.com for the most recent version of this manual.
Supplied Parts and Hardware / Matériel et les pièces fournies / Partes suministradas y materiales A B C D x2 F G x3 L H x3 x2 I J x12 x12 N M E O x3 K x12 P x2 Q: 3/5/6mm R S T U Tools / Outils / Herramientas: Phillips Screwdriver Tournevis Phillips Destornillador Phillips SD13 | www.senecaav.
1a. Attach support tube to surface with clamp Fixez le tube de support à la surface avec le pince Conecte el tubo de soporte a la superficie con la abrazadera 1.1 1.2 1.3 I A T K Q C D 1b. Attach support tube to surface with grommet mounting Fixez le tube de support à la surface avec le montage fil noyé Conecte el tubo de soporte a la superficie con arandela aislante 1.1 1.2* * 7/16” (10 mm) A if necessary si nécessaire si necesario S 1.0"~3.9" (25~100 mm) 1.3 0.8"~3.9" (20~100 mm) 1.
2. Q J 2.2 2.1 3a. Mount monitor with flat back to VESA plate Montez un moniteur avec un dos platà la plaque VESA Monte el monitor con la parte posterior plana a la placa VESA L 3b. Mount monitor with curved back to VESA plate Montez un moniteur avec un dos courbé à la plaque VESA Monte el monitor con la parte curva a la placa VESA N P SD13 | www.senecaav.
4. 4.1 x3 4.2 x3 4.3 6 SD13 | www.senecaav.
5. 4.4 M x3 6. R 7. SD13 | www.senecaav.
Check out more great products from Seneca AV Découvrez d’autres produits de haute qualité par Seneca AV ¡Conozca alguno más de los grandes productos Seneca AV SA21 SM61 SN21 Warranty Limited Warranty to Original Purchaser Seneca AV warrants the equipment it manufactures to be free from defects in material and workmanship for the following limited warranty period of: 24 months parts and labour.
