WeSense Pod WSP3‐1 User Manual
Below is an image of how the POD connects to the printed sensor brief. This alignment is very important to follow. When closing the cover of the POD be sure the desired alignment is intact as seen in the image below Once the POD is properly attached, fold over the top portion of the brief, it should look like the image below. For any reason if the POD is not flat against the brief, please use nursing tape to adhere it to the brief.
App A Guide LLocate the FiitRight Connect A on your tablet screen App a after you pow wer on Enter yo our usernam me and password given to access a the app Username e: user_name e Password: passmein Note: User name and ovided passworrd will be pro by the health h care faacility Ressidents will be b listed oncee you u are entered d into the ap pp A grey ““X” symbol in ndicates a pod is n not connecteed.
A co onnected pod d can be iden ntified by a color symbol. A green cheeck mark he pod is con nnected indiccates that th and the brief has not been vvoided in. A yeellow exclamation point iindicates thatt a brief has been b voided in but is not near absorbent capacityy and is still dry on the reesident’s skin. A red d exclamatio on point indiccates that a brief is neaaring its abso orptive capaccity and mayy leak.
If the t tablet beecomes dissconnected ffrom Wi‐Fi an alert will display oveer the app. The app will indicatte when a po od ow battery b by displaying a has a lo red batttery symboll Removve the pod from the brieff, clean per p IFU, and place the po od on the charger. To assign another p pod to a nt. Select a rresident by residen clickingg on the line for that residen nt.
Selecct the drop down for “Seleect/Remove Pod” P A drop p‐down men nu will appeaar, choosse a new pod d by clicking iit.
Radio related information Please note that this product is a radio transmitting equipment and any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate or use the product. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The device has been tested and compliance with SAR limits, users can obtain Canadian information on RF exposure and compliance. Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes.